Pentax K-3 Mark III Monochrome Camera Body (Black) with Pentax O-GPS2 GPS Unit Bundle

Pentax K-3 Mark III Monochrome Camera Body (Black)

Monochrome-specific CMOS image sensor

The PENTAX K-3 Mark III Monochrome incorporates a monochrome-specific, APS-C-format CMOS image sensor free of an AA (anti-aliasing) filter with approximately 25.73 effective megapixels. Typical color image sensors are designed to receive light passing through red (R), green (G), and blue (B) color filters, so each pixel detects only one color data component. To compose a monochrome image, color sensors must convert color data into monochromatic data by interpolating the color data they collect. The new monochrome-specific image sensor, however, can faithfully reflect the brightness data obtained by each pixel in the image — without the interpolation process — to produce extra-fine monochromatic expression, in images high in resolution and rich in gradation.

Image quality exclusively designed for monochrome photography

The image quality produced by the original PENTAX K-3 Mark III was thoroughly reevaluated and totally redesigned to optimize the imaging characteristics of the new monochrome-specific image sensor. The result is a highly sensitive expression with a natural bokeh (defocus) effect, rich gradation, and extra-fine sharpness — an image only the monochrome-specific image sensor can deliver.

A selection of monochrome-specific finishing touches

The PENTAX K-3 Mark III Monochrome offers three Custom Image modes exclusively designed for monochrome photography to provide distinctive finishing touches. In addition to Standard mode, it also provides Hard mode to produce high-contrast images, and Soft mode to create high-key, low-contrast images. Each mode provides minute adjustments of parameters such as tone, key, contrast, and sharpness, allowing the photographer to personalize images for the desired finishing touch.

Exterior design reflecting the monochrome photography concept

The concept of monochrome photography is evident throughout the PENTAX K-3 Mark III Monochrome camera body, from the white backlight illumination on the LCD data panel positioned on its upper panel, to the “Monochrome” lettering printed on the upper-left shoulder of the back panel, and the SR (Shake Reduction) logo finished in silver. The camera’s user interface menu features a black-and-white color scheme as default, while the icons printed on buttons and switches across the camera’s exterior are finished in three shades of gray.

Note: Since the PENTAX K-3 Mark III Monochrome is solely designed for black-and-white photography, some of its features and functions may differ from those of the PENTAX K-3 Mark III.

Pentax GPS Unit O-GPS2

The PENTAX O-GPS2 provides reliable and high-precision positioning data gathered from GPS in the U.S., QZSS in Japan, GLONASS, and Galileo. When the PENTAX O-GPS2 is mounted on a compatible PENTAX digital SLR camera*, the user can record the latitude, longitude, altitude, universal time coordinated (UTC), and aspect of shooting locations onto captured images. Image files carrying the location data can be used to track shooting locations and review location data on a PC. The location data stored on such files also makes it much easier to sort and file recorded images.

By coupling the location data with the camera’s SR (Shake Reduction) system, the unit offers a range of unique, advanced applications, including ASTROTRACER function, which makes it easy to capture stellar images of the night sky, Simple Navigation function, which calculates the direction and distance to a given destination from a current position, and Electronic Compass function which displays the camera’s direction on its LCD monitor with great precision

GPS function for an effortless recording of shooting location data

The O-GPS2 mounts on the hot shoe of a compatible camera and records the latitude, longitude, altitude, universal time coordinated (UTC), and direction of the shooting location onto captured images. In addition to GPS in the US and QZSS in Japan, GLONASS and Galileo can be newly received.

ASTROTRACER simplifies astrophotography

When mounted on the corresponding PENTAX digital SLR camera body, the O-GPS2 also offers the advanced ASTROTRACER function,** which couples the unit with the camera’s SR (Shake Reduction) system for the effortless tracing and photography of celestial bodies. The unit calculates the movement of stars, planets, and other bodies using the latitude obtained from the location data and the camera’s alignment data (horizontal and vertical inclinations and aspects) obtained from its magnetic and acceleration sensors, then shifts the camera’s image sensor in synchronization with the movement of the objects.*** In the resulting image, stars and other bodies are captured as solid points rather than blurry streaks, even during extended exposures. It also makes astrophotography much simpler, as it requires only a tripod and eliminates the need for an additional accessory such as an equatorial telescope.

In addition to the normal ASTROTRACER: Type 1, ASTROTRACER: Type 2, available only when the O-GPS2 is used with the PENTAX K-3 Mark III, makes the image sensor follow the movement of the celestial body at half the speed of the Type 1. The photographer can suppress the flow of the landscape on the ground and shoot both the stars and the landscape in a well-balanced manner.

** This function is available only when the O-GPS2 is mounted on a PENTAX digital SLR camera body equipped with a SR system.

Simple Navigation calculates location data for destinations

The O-GPS2 offers a Simple Navigation function, which calculates the direction and distance to a given destination from the current position. The user can either locate destinations using location data stored on recorded images or register and/or assign them by uploading location data created on a PC.

Electronic Compass function indicates and records direction

The O-GPS2 has an Electronic Compass function which displays the camera’s direction on its LCD monitor with great precision. Using its magnetic sensor and the location data, the unit indicates the aspect in relation to the true north. The user can also record directional data on captured images.

Koah Roebling Street Camera System Gadget Bag with Accessory & Cleaning Kit

The lightweight Koah Roebling Street Camera System Gadget Bag is designed to hold and protect your DSLR camera from dust, scratches, bumps and bruises while traveling on the road. A convenient flap enables full access to the main compartment, allowing you to easily remove the camera and gear within seconds. The front flap is secured via two buckle clips. The case features a front zippered pocket and mesh pockets on both sides. Also included with this bag is an optics care and cleaning kit.

Convenient Design

The Koah Roebling Street’s padded interior comes with padded dividers that help for better organization. It features additional pockets at the front, side and rear for storing small accessories like batteries, memory cards, cables and lens caps. Attach the included shoulder strap for comfortable carrying. The case also features an ergonomic cushioned handle at the top.

Koah Photography Cleaning Kit

This Photography Cleaning Kit by Koah comes complete with a compact mini tripod, a microfiber lens cloth, a fine bristle cleaning brush, lens cleaning wipes, a lens cleaning spray bottle, a rubber bulb air blower, loop straps, and finally a small carrying pouch to store these accessories. This kit was designed to meet the cleaning needs of various photography and video optics, binoculars and spotting scopes, filters and other glass elements.

SanDisk 64GB Extreme Pro SDXC UHS-I Memory Card

The SanDisk 64GB Extreme Pro SDXC UHS-I Memory Card saves you time transferring media with reading speeds of up to 200MB/s. With shot speeds of up to 90MB/s and UHS Speed Class 3 (U3) recording, you are ready to capture stunning, high-resolution, stutter-free 4K UHD video.

Improve Your Workflow Efficiency

With SanDisk QuickFlow Technology, this card optimizes performance for timesaving media offloads with quick transfer speeds up to 200MB/s (64GB-1TB). You can pair with the SanDisk Professional Pro-Reader SD and microSD to achieve maximum speeds (sold separately).

Shot Speeds up to 140MB/s

With shot speeds up to 140MB/s the card is perfect for capturing the action as it happens, without missing a beat.

Perfect for 4K UHD Video

Sometimes speed is what you need. The SanDisk Extreme Pro SD UHS-I card delivers the performance to capture stunning, uninterrupted 4K UHD video.

Stunning Sequential Burst Mode Shots

Rated UHS Speed Class 3 (U3) and Video Speed Class 30 (V30), the SanDisk Extreme PRO SD UHS-I card lets you capture sequential burst mode shots without missing a beat.

Durability You Can Count On

Built for and tested in harsh conditions, the SanDisk Extreme Pro SD UHS-I card is temperature-proof, waterproof, shock-proof, and x-ray-proof.

Recover Images You Accidentally Deleted

Includes an offer for RescuePro Deluxe 2-year data recovery software, which lets you restore images you accidentally deleted.