ADAM Audio A7V Powered Two-Way Studio Monitor (Pair) with Mk2 Powered Studio Subwoofer and Cables
Product highlights:
ADAM Audio A7V Powered Two-Way Studio Monitor
- Accurate, full-bodied sound in a compact form factor
- Designed for small studio spaces
- A frequency range of 41 Hz to 42 kHz
- Great for producing podcasts mixing string quartets
- Rotatable HPS Waveguide and X-ART Tweeter
In the box
Adam Audio Sub10 10-Inch Mk2 Powered Studio Subwoofer
- Adam Audio Sub10 10-Inch Mk2 Powered Studio Subwoofer
- Power Cord
- User Manual
- Limited 2-Year Warranty with Optional Extension to 3-Year with The Registration Of The Product
2 X ADAM Audio A7V Powered Two-Way Studio Monitor
- ADAM Audio A7V Powered Two-Way Studio Monitor
- Loudspeaker
- Power Cable
- Quick Start Guide
- Limited 2-Year Warranty (Plus 3-Year Optional Warranty with Product Registration)
2 X Knox Gear 25Ft XLR Cable Male to XLR Female Microphone Cable
- Knox Gear 25-Feet XLR Male to XLR Female Microphone Cable
- Limited 1-Year Warranty
2 X Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Male to Male Balanced Cable (10-Feet)
- Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Male to Male Balanced Cable (10-Feet)
- Limited Lifetime Warranty
ADAM Audio A7V Powered Two-Way Studio Monitor (Pair) with Mk2 Powered Studio Subwoofer and Cables
ADAM Audio A7V Powered Two-Way Studio Monitor
ADAM Audio HPS (high-frequency propagation system) waveguide technology enables tweeters to disperse sound with controlled consistency, broad on the horizontal axis but tightly focused in the vertical plane. The A-Series introduces a rotatable HPS waveguide design. You can shift A Series tweeters in 90-degree steps to continue to benefit from HPS waveguide technology whether you position the speakers horizontally or vertically. The A-Series HPS Waveguide is made from a new glass fiber polymer compound that helps create a clear sound, free of unwanted resonance. The ADAM Audio X-ART tweeter is at the heart of the rotatable HPS waveguide. Handmade in Germany, the X-ART tweeter provides precise transient responses and reproduces the finest sonic details. This X-ART tweeter is used in every A Series speaker, providing a detailed, consistent sound across the product line.
Adam Audio Sub10 10-Inch Mk2 Powered Studio Subwoofer
The Sub10 MK2 is a powerful subwoofer designed to extend the low-frequency capabilities of any near or midfield monitoring system down to 25Hz. A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods. An additional output allows you to cascade as many subwoofers as needed. The Sub10 MK2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).
ADAM Audio A7V Powered Two-Way Studio Monitor
The waveguide technique employed by ADAM Audio HPS (high-frequency propagation system) tweeters allows them to disseminate sound with controlled consistency, broad on the horizontal axis yet tightly focused in the vertical plane. The A-Series is the first to have a rotating HPS waveguide. Whether you set the speakers horizontally or vertically, you can benefit from HPS waveguide technology by shifting A Series tweeters in 90-degree steps. The A-Series HPS Waveguide is constructed of a unique glass fiber polymer composite that aids in the creation of a clear, resonance-free sound. The rotating HPS waveguide is powered by the ADAM Audio X-ART tweeter. The X-ART tweeter is handcrafted in Germany and enables precise transient responses and reproduction of the finest acoustic characteristics.
Mineral Woofer with Multiple Layers
A Series of woofers are made from a special blend of mineral stone fibers that have been baked together to create a lightweight but extremely stable material. Each cone's mineral composition, layering, and geometry are unique to the driver used in the model. A Series woofers produce strong output with little distortion and a clear low-end by combining this material with a novel magnet technology.
Electronics with a Digital Signal Processor (DSP)
The A-Series takes advantage of DSP-based electronics' revolutionary capacity to give more tuning precision and predictability than analog-only speakers. With firmware that can be updated via Ethernet, you can expect to see the latest ADAM Audio DSP-based capabilities, such as additional filter types and features, as well as alternate voicings, over time.
Hybrid Amplification
The A-Series is a hybrid of digital and analog technology. Class D amplifiers drive the woofers, which aid to create linear performance while minimizing distortion. These amplifiers were chosen for their power and efficiency, both in terms of energy usage and sound reproduction. Low thermal dissipation allows for a smaller heat sink, allowing for more investment in the A-Series' excellent power and performance.
Voicings
The A-Series monitors have a pre-defined sound profile called "Voicing." You can choose between two options on the back panel: "UNR" and "Pure." The "Ext" option, which is dedicated to the expanded capability that comes with A Control via the Ethernet connection, can also be found here.
A Command (Real-Time Remote Control)
All A-Series monitors' DSP-based features can be controlled remotely and in real-time over Ethernet using the free A Control program. Customers who have registered their A-Series monitors can download A Control for Windows and macOS from the MyADAM section of www.adam-audio.com.
Sonarworks Integration and Room Correction
Speakers in the A-Series are meant to adapt to changing needs, tastes, and situations. Advanced filters can be immediately pushed to an embedded platform onboard the monitors using the A Control software to help adjust for poor room acoustics. Filters from Sonarworks, an industry-leading third-party, are supported on this embedded platform. You can calibrate your speakers for a new environment or changing tastes using Sonarworks software and a measurement mic.
Room Adaptation
There are four bands of room adaptation equalization on the back panel of A-Series speakers: Bass, Desk, Presence, and Treble. Each band can be adjusted in predetermined increments, providing over 100 tuning possibilities to assist compensate for common acoustic issues caused by speaker placement.
Knox Gear 25Ft XLR Cable Male to XLR Female Microphone Cable
Knox Gear 25FT XLR Male - XLR Female Microphone Cable, is professionally designed to prevent external interference and ensure signals travel rapidly and smoothly with minimum distortion, delay, or loss. These cables feature two 20-gauge CCAM conductors, which are twisted pair with cotton yarn fillers, conductive PVC shield with 100% coverage, and CCAM spiral shielding with 90% coverage.
Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Male to Male Balanced Cable (10-Feet)
The Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Balanced Cable gives you a male on one end, and a male XLR on the other. The Pig Hog Solutions line features an expanding selection of adapters and cables designed to solve common interfacing problems in the studio and on stage. The cable is manufactured to our high-quality standards to insure transparent reproduction of the source audio without any coloration or distortion. Pig Hog is designed by musicians, for musicians.
Ratings and reviews
