ADAM Audio T5V Active Nearfield Monitor (Pair) with Studio Subwoofer, XLR and XLR to 1/4 TRS Cables

MFR: 196271692652
SKU: ADAMT5VT10S
$849.99

Starting at $66/mo




Need help deciding? Contact us right now!

In the box

Adam Audio T10S 10-Inch Powered Studio Subwoofer

  • Adam Audio T10S 10-Inch Powered Studio Subwoofer
  • Power Cord
  • Quick Start Guide
  • Welcome Card
  • Limited 2-Year Warranty

2 X Adam Audio T5V Active Nearfield Monitor

  • Adam Audio T5V Active Nearfield Monitor
  • Power Cord
  • Quick Start Guide
  • Limited 2-Year Warranty

2 X Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Male to Male Balanced Cable (10-Feet)

  • Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Male to Male Balanced Cable (10-Feet)
  • Limited Lifetime Warranty

2 X Knox Gear 25Ft XLR Cable Male to XLR Female Microphone Cable

  • Knox Gear 25-Feet XLR Male to XLR Female Microphone Cable
  • Limited 1-Year Warranty

From The Wavelength Blog Read more

Adam Audio T10S 10-Inch Powered Studio Subwoofer

The Adam Audio T10S 10-Inch Powered Studio Subwoofer is a powerful yet compact active subwoofer, designed to extend the bass response of any nearfield studio monitor. However, the subwoofer’s performance, features, and connectivity are engineered specifically to complement ADAM Audio’s T5V and T7V speakers. While reciting the T Series design language, the T10S is one of the most compact subwoofers in its class, which allows it to be easily integrated with any studio environment. The acoustic performance was optimized by four high-grade flexible rubber feet that prevent the sound from exciting the floor and a spacious rear-facing bass reflex port for optimized airflow.

Ergonomics

Equipped with a down-firing 10-inch woofer and a 130 W Class-D amplifier, the T10S’ frequency response ranges from 28 Hz to 120 Hz and offers an impressive max. SPL of 104 dB. An internal adjustable two-channel crossover allows calibration of the bass signal and provides optimal performance of the total system. The options at the rear of the subwoofer allow for varied adjustments which compensate for room acoustics or they offer more control for satellites attached.

Adam Audio T5V Active Nearfield Monitor

The Adam Audio T5V Active Nearfield Monitor is a highly affordable two-way nearfield monitor optimized for small control rooms.

Ergonomics

With its 5-inch woofer, the bass frequency response of the T5V extends to 45 Hz. The new U-ART tweeter, a breakthrough solution for use in high-resolution recording and mixing on a budget, goes up to 25 kHz and is mated to a precision waveguide with the same dispersion-control attributes as the high-frequency propagation (HPS) waveguide used in Adam Audio’s flagship S Series monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working.

Mechanism

A beveled cabinet with a rear-firing bass reflex port and a small footprint allows placement anywhere in your room, no matter how small, and contains built-in DSP-controlled driver crossovers and equalization as well as multi-way analog connections. Powered with a 50 W Class D amplifier for the woofer and a 20 W Class D amplifier for the U-ART tweeter, the T5V produces SPLs of up to 106 dB per pair. Excellent acoustic characteristics, small dimensions, and an outstanding cost/performance ratio make this studio monitor perfectly suited for use in small control rooms in music, video, and broadcast production.

U-ART 1.9-Inch Accelerated Ribbon Tweeter

The new U-ART 1.9-inch accelerated ribbon tweeter, as used in the T Series, is made of a high-tech polyimide film and provides pristine and extended high-frequency response up to 25 kHz,virtually unheard of in monitors in this price range, and a breakthrough solution for use in high-resolution recording and mixing on a budget. Unlike a conventional dome or cone tweeter that uses a piston action to move air and reproduce sound, the U-ART tweeter uses a pleated ribbon that alternately draws air into its folds and squeezes it out like the folds respectively expand apart and press together in response to the inputted audio signal. This design produces four times as much air movement as does a piston-based design, creating higher sound pressure levels (SPLs) with lower distortion.

High-Frequency Propagation System

The HPS (High-frequency Propagation System) waveguide was initially designed at ADAM Audio for the S-Art of the S series range with the aid of the latest computer modeling techniques. It hones the dispersion of the speakers to an even, uniform consistency, broad in the horizontal axis but tightly focused in the vertical plane. This minimizes potentially distracting reflections from the horizontal surfaces of significant studio furniture (for example mixing consoles), ensures that imaging remains constant, and creates a large, well-controlled, and stable ‘sweet spot’, even at high output levels.

Pulse Width Modulation

The PWM (Pulse Width Modulation) sometimes referred to as Class D amplification, sometimes called Switching Amp Technology converts the incoming signal to a series of rectangular waveforms of equal height. The width of the rectangles varies in time and the relation of the width of the rectangles represents the musical signal. This waveform can be amplified much more simply, as the transistors are not modulated anymore; instead, they are used as switches that only turn the power supply voltage on and off. It is possible that a very fast mechanical switch could do the job, but power transistors are a better choice for the task, so PWM amplifiers still work pretty much like conventional Class AB designs.

Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Male to Male Balanced Cable (10-Feet)

The Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Balanced Cable gives you a male on one end, and a male XLR on the other. The Pig Hog Solutions line features an expanding selection of adapters and cables designed to solve common interfacing problems in the studio and on stage. The cable is manufactured to our high-quality standards to insure transparent reproduction of the source audio without any coloration or distortion. Pig Hog is designed by musicians, for musicians.

Knox Gear 25Ft XLR Cable Male to XLR Female Microphone Cable

Knox Gear 25FT XLR Male - XLR Female Microphone Cable, is professionally designed to prevent external interference and ensure signals travel rapidly and smoothly with minimum distortion, delay, or loss. These cables feature two 20-gauge CCAM conductors, which are twisted pair with cotton yarn fillers, conductive PVC shield with 100% coverage, and CCAM spiral shielding with 90% coverage.

ADAM Audio T5V Active Nearfield Monitor (Pair) with Studio Subwoofer, XLR and XLR to 1/4 TRS Cables

Main

Speaker TypeActive Subwoofers
Driver Size10"
ColorBlack

Adam Audio T10S 10-Inch Powered Studio Subwoofer

System

Watts190

Power

Power Consumption190 W

Physical

Weight27 lb
ColorBlack

Connectivity

Audio InputRCA

Adam Audio T5V Active Nearfield Monitor

System

Watts132

Power

Power Consumption132 W

Physical

Mount TypeDesktop
Weight12.6 lb
ColorBlack

Connectivity

Audio InputRCA

Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Male to Male Balanced Cable (10-Feet)

Environmental

Warranty LengthLifetime

Knox Gear 25Ft XLR Cable Male to XLR Female Microphone Cable

Environmental

Warranty Length1 Year

General

Cable Length25 feet

Same Day Shipping

All orders placed by 4PM( EST), Monday through Thursday, and by 11AM (EST) on Friday, are shipped same day. Orders placed outside these times will ship the next business day. We do not ship internationally or to Puerto Rico, Guam and other US territories at this time. For more details click here.

Free Two-Day Shipping

We offer free expedited shipping on thousands of items within the continental USA (this does not include Alaska and Hawaii).

Flexible, Easy Returns

If you're not happy with your purchase for any reason, our flexible 30-day free return policy makes it easy to get a full refund. Click here to view our return policy.

Ratings and reviews