Aputure Light Storm 600X Pro (V-Mount)

The Light Storm 600x Pro is the newest member of the Aputure LS 600 series of point-source LEDs, featuring a 600W bi-color chipset with precision color blending optical design. It harnesses the form factor and design of the LS 600d Pro, the same control box interface, and Bowens Mount compatibility while introducing a 2700K to 6500K variable CCT range and maintaining an output of 18,510 lux at 3m with the F10 Fresnel.

With only a 720W maximum power draw, the LS 600x can replace compact HMIs and Tungsten lights on set. The LS 600x Pro takes advantage of LEDs’ low power consumption compared to traditional filament lights and can be powered by V-Mount, Gold Mount, and Block Batteries via its multi-voltage battery plates or 48V 3-Pin XLR Input.

Designed for professionals, the LS 600x Pro’s weather-resistant design renders it capable of withstanding inclement weather conditions like light rain and water spray. It also features an intuitive control interface with advanced LCD, Sidus Link App Control, LumenRadio Wireless DMX, and ethernet control.

Aputure Light Dome 150

The Light Dome 150 is a 150cm (59in) Bowens Mount QuickSetup Circular Softbox. Its substantial surface area makes it ideal for high-powered Bowens Mount LEDs, such as the Aputure LS 600d Pro or LS 600x Pro. Its 32-sided quick-setup build transforms a hard point-source light into a soft source with perfectly circular reflections in one minute. The Light Dome 150 also includes two diffusion strengths to allow users to fine-tune their intensity and light quality. 

Aputure F10 Fresnel

The Aputure F10 Fresnel is made for modular Bowens Mount fixtures. With its wide 250mm (9.84-inch) glass Fresnel, the F10 both immensely intensifies the output of a point-source LED, but also results in a quality of light lighting technicians will find similar to a Tungsten 5K or Studio 2K.

Intensely Bright

The F10 Fresnel functions at its best when paired with the Aputure LS 600d Pro, a 600W Daylight COB LED. Together, this combination eclipses Studio 2K Tungsten lights, and approaches the intensity of 5K Tungsten fixtures at flood. With a combined flood output of 11,440 lux and spot output of 29,300 lux at 3 meters, the 600d Pro and F10 Fresnel even compete on par with higher-powered HMIs.

Dual-Optic Design

The F10 Fresnel matches the unique design of the Fresnel 2X, utilizing a two-stage optical system to maximize light output. Utilizing a rear aspherical focusing element, the F10 Fresnel optimizes the output of an LS 600d Pro to fill the front Fresnel Element, resulting in up to 340% additional output in Flood mode.

Ergonomic Focusing

To ergonomically and precisely adjust its variable 15-45-degree beam angle, the F10 Fresnel uses Aputure’s helicoid focus design introduced in the Fresnel 2X. This seamless design requires no extra knobs or handles. Simply twist the lens ring, and adjust the spot/flood controls.

Minimized Light Leaks

Building on our experience from the Fresnel 2X, the F10 Fresnel uses an offset ventilation design in its heat-resistant body that allows for airflow while minimizing light leaks.

Impeccable Build

Despite its impressive 250mm (9.84-inch) Fresnel diameter, the F10 Fresnel maintains a compact heat-resistant construction. The shell of the F10 can withstand the heat of the LS 600d Pro, and due to its collapsible, and aspherical focusing lens, it can stow away to a depth of 6.8 inches (172.5mm).

Drop-In Accessory Slot

Another of many firsts, the F10 Fresnel is also the first Bowens Mount Fresnel to feature an industry-standard drop-in accessory slot. This heavy-duty accessory slot allows users to mount the F10 Barn Doors on the Fresnel for proper light shaping, and can even fit a 13-inch (330mm) scrim.