AtlasIED 135-18 Stand-Alone Floor Rack with Fixed Rails 18.5-Inch Deep, 35RU

AtlasIED 135-18 Stand-Alone Floor Rack with Fixed Rails 18.5-Inch Deep, 35RU

The AtlasIED 135-18 Stand-Alone Floor Rack with Fixed Rails 18.5-Inch Deep, 35RU contains vertical panel spaces. The 135-18 cabinet includes one pair of 11-gauge CRS fixed mounting rails. It is constructed of 16-gauge CRS and includes base, top panel, side panels, mounting rails, a removable rear door with cylinder lock, and flush door pull handle.

Rear Doors

It offers several installer-friendly advantages, including an expanded 6RU opening in the cabinet top and bottom which can be left open for wire access and/or ventilation, or closed using a standard vent or solid panels. The rear doors are hung with quick-release spring hinges which allow them to be rotated 180-degree for right or left-hand opening. If a front door is ordered, it will be keyed differently than the rear door for security.

Rack Rails

The rack rails are precision tapped 10-32 and recessed 11/16 inch (17.5mm). These plated rails include a convenient RU indicator to aid in equipment alignment. The rails are standard E.I.A. 5/8-5/8-1/2 inch spacing.

Arrays

The conduit arrays are located on the top and bottom surface panels, as well as the top and bottom back flanges. The flange arrays consist of five knockouts, three 1-inch (25mm) standard, and two 1/2 inch (13mm) x 3/4 inch (19mm) concentric. The surface arrays are comprised of 4 knockouts, two, 1-inch (25mm) standard knockouts, and two 1/2 inch (13mm) x 3/4 inch (19mm) concentric.

Smooth Ergonomics

The stamped, perforated vents are located on all sides as well as on the rear door to allow for maximum air convection. The cabinet surfaces are phosphate pre-treated for proper paint adhesion of the textured black epoxy finish.