AtlasIED 144-18 Stand-Alone Floor Rack with Fixed Rails 18.5-Inch Deep, 44RU
Product highlights:
- 21RU to 44RU heights,18 1/2 depth
- Fixed rack rails for smooth operation
- Locking rear door offers right-or left-hand hinging capability
- Increased opening in base facilitates wiring to conduit
- Manufactured to E.I.A. Standards
- Perforated front, rear and side vents for heat dissipation
- UL 1678 listed
In the box
AtlasIED 144-18 Stand-Alone Floor Rack with Fixed Rails 18.5-Inch Deep, 44RU
- AtlasIED 144-18 Stand-Alone Floor Rack with Fixed Rails 18.5-Inch Deep, 44RU
- Base, Top Panel, Side Panels, and Rear Door, Fully Assembled
- Welded 16-Gauge Cold Rolled Steel (CRS) Construction
- Vented Top, Base, Sides, and Rear Door
- One pair of 12-gauge, CRS Fixed Mounting Rails Denote RU Increments
- Removable Left/Right Rear Door with Lock
- Pre-Installed Hardware for Optional Front Door Installation
- 18 Conduit Knockouts
- Limited 5-Year Warranty
AtlasIED 144-18 Stand-Alone Floor Rack with Fixed Rails 18.5-Inch Deep, 44RU
The AtlasIED 144-18 Stand-Alone Floor Rack with Fixed Rails 18.5-Inch Deep, 44RU is welded 16-gauge CRS and assembled for immediate use.
Read Doors
The rear doors are hung with quick-release spring hinges which allow them to be rotated 180-degree for right-or left-hand opening. The rear door includes a flush door handle and cylinder lock. If the front door is ordered, it will be keyed differently than the rear door for security. It offers several installer-friendly advantages, including a 6RU standard panel width opening in the cabinet top and conduit arrays. The top opening can be left open for wire access and/or ventilation partially covered with the Isopanel for non-conductive cable access or closed using 2 5 1⁄4 inch (3 RU) panels. The top opening is also perfect for installing an EFP Series fan.
Arrays
The conduit arrays are located on the top and bottom surface panels, as well as the top and bottom back flanges. The flange arrays consist of five knockouts, three 1-inch (25 mm) standard, and two, 1⁄2 inch (13 mm) 3⁄4 inch (19 mm) concentric. The surface arrays are comprised of 4 knockouts, two 1-inch (25 mm) standard knockouts and two 1⁄2 inch (13 mm) 3⁄4 inch (19 mm) concentric. The stamped, perforated vents are located on the front, sides, and rear door to allow for maximum air convection.
Sturdy Cabinets
The cabinets include one pair of 12-gauge, CRS fixed mounting rails tapped 10-32 and recessed 5⁄8 inch (16 mm). The rails are standard E.I.A. spacing. The cabinet surface is phosphate pre-treated for proper paint adhesion. The standard finish is textured black epoxy 962.
Ratings and reviews
