AtlasIED 240-18 Welded Rack 18.5-inch Deep and 40RU

AtlasIED 240-18 Welded Rack 18.5-inch Deep and 40RU

The economical AtlasIED 240-18 cabinet is 22 5/16-inch wide, 18 1/2-inch deep, and contains 40RU vertical panel spaces. The 240-18 cabinet includes one pair of 11-gauge CRS adjustable mounting rails.

Construction

The series is constructed of 16-gauge CRS and include base, top panel, side panels, mounting rails, a removable rear door with cylinder lock and flush door pull handle. Offers several installer-friendly advantages, including an expanded 6RU opening in the cabinet top and bottom which can be left open for wire access and/or ventilation, or closed using a standard vent or solid panels.

Rear and Front Doors

Rear doors (included with all models) are hung with quick-release spring hinges which allow them to be rotated 180-degree for right or left-hand opening. If a front door is ordered, it will be keyed differently than the rear door for security.

Rack Rails

Rack rails are precision tapped 10-32 and recessed 11/16-inch (17.5mm). These plated rails include convenient RU indicator hashmarks to aid in equipment alignment. Rails are standard E.I.A. 5/8-inch-5/8-inch-1/2-inch pacing.

Conduit Arrays

Conduit arrays are located on the top and bottom surface panels, as well as the top and bottom back flanges. Flange arrays consist of five knockouts, three 1-inch (25mm) standard, and two 1/2-inch (13mm) x 3/4-inch (19mm) concentric. Surface arrays are comprised of 4 knockouts, two, 1-inch (25mm) standard knockouts and two 1/2-inch (13mm) x 3/4-inch (19mm) concentric.

Vents

Stamped, perforated vents are located on all sides as well as on the rear door to allow for maximum air convection. Cabinet surfaces are phosphate pre-treated for proper paint adhesion of the textured black epoxy finish.