- Constructed of 16-gauge CRS
- Stamped, perforated vents
- Adjustable rack rails
- The best value in the industry
AtlasIED 244-30 30-Inch Deep Welded Rack (44RU)
The economical AtlasIED 244-30 cabinet is 22 5/16-inch wide, 30-inch deep, and contains 44RU vertical panel spaces. The 244-30 cabinet includes one pair of 11-gauge CRS adjustable mounting rails. The rack is constructed of 16-gauge CRS and include base, top panel, side panels, mounting rails, a removable rear door with cylinder lock and flush door pull handle.
AtlasIED 244-30 cabinet offers several installer-friendly advantages, including an expanded 6RU opening in the cabinet top and bottom which can be left open for wire access and/or ventilation, or closed using a standard vent or solid panels. Rear doors (included with all models) are hung with quick-release spring hinges which allow them to be rotated 180-degree for right or left-hand opening. If a front door is ordered, it will be keyed differently than the rear door for security.
Rack rails are precision tapped 10-32 and recessed 11/16-inch (17.5mm). These plated rails include convenient RU indicator markings to aid in equipment alignment. Rails are standard E.I.A. 5/8-inch-5/8-inch-1/2-inch spacing.
Conduit arrays are located on the top and bottom surface panels, as well as the top and bottom back flanges. Flange arrays consist of five knockouts, three 1-inch (25mm) standard, and two 1/2-inch (13mm) x 3/4-inch (19mm) concentric. Surface arrays are comprised of 4 knockouts, two, 1-inch (25mm) standard knockouts and two 1/2-inch (13mm) x 3/4-inch (19mm) concentric.
Stamped, perforated vents are located on all sides as well as on the rear door to allow for maximum air convection. Cabinet surfaces are phosphate pre-treated for proper paint adhesion of the textured black epoxy finish.