Product highlights:
- 12-inch deep center mounting section
- Adjustable mounting rails provide flexibility
- Punched vents assure heat dissipation
- Frame flanges, plus corner-brace structural supports
- Miters provide stability for mounted equipment
- Sturdy wall-mount cabinet saves valuable floor space
- Wire management provisions allow organized wire access
AtlasIED 312-12 19-Inch Wide Opening Stand-Alone Wall Cabinet
The 300 Series AtlasIED 312-12 wall cabinet is welded with center-section depths of 12-inch and 15-inch, respectively. The basic model includes three, 16-gauge CRS sections which include a 2-inch deep, solid-steel front door, a 12-inch or 15-inch deep center section with adjustable mounting rails, and a 4-1/2-inch deep rear door. Panel space openings range from 7RU to 35RU.
Enclosures
Enclosures are equipped with provisions for custom cabinet mounting, wire management, equipment mounting, and structural support. The cabinet is finished in #962 black epoxy.
Adjustable Front Rack Rails
It includes adjustable front rack rails tapped 10 to 32, and manufactured to standard E.I.A. 1/2-inch spacing. Models with RU openings of 16RU, 24RU, and 35RU are equipped with center section mounting rail supports.
Corner Brace Supports
Internal open raceways provide cable pathways in the cabinet. Corner brace supports, which straddle the back and side panel of the rear section (hinge side), also feature round (1-1/4-inch diameter) wire access holes for harnessing excess wire.
Rear Section
The back face of the rear section is equipped with 1/4-inch deep boss detents which give Contractors field flexibility to install custom plywood, aluminum, or steel sub-plate for mounting accessories inside the cabinet. Boss detents are on 12-inch centers and vary depending upon model height (10RU, 12RU, and 16RU models have four detents, 24RU models have six detents and 35RU models have eight detents).
Knockouts
The cabinets have 20 conduit knockouts on the rear section, except the 307-12 which has 16. Conduit arrays are located at the top and bottom of the back panel (except 307-12 which has a centered array), as well as on the top and bottom back flanges.
Panel Arrays
Panel arrays consist of four knockouts: two 1-inch (25mm) standard and two 1/2-inch (13mm) / 3/4-inch (19mm) concentric. Top and bottom flange arrays are comprised of six knockouts: three 1-inch (25 mm) standard and three 1/4-inch (13 mm) / 3/4-inch (19 mm) concentric.
Perforated Vents
Perforated vents, located on both sides (top and bottom) of the center section, provide ventilation for rack-mounted electronics.
Exceptional Structural Support
The cabinets offer exceptional structural support. The units’ one-piece front and rear sections are strengthened with frame flanges on the bottom, top, and sides. Center sections are plug-welded, joining bottom and top panels to side panels. Rear sections have corner brace supports which bridge the back and side panel (hinge side) giving the back (mounted) panel extra reinforcement for tension relief. Cabinets also have electric-welded seams and miters which increases the cabinets’ overall bonding. The center section offers maximum reinforcement provisions, such as a uniquely designed center section guide plate that reduces potential sagging by distributing cabinet and equipment weight to the rear section.
Wide Guide Plate
The 11-gauge, 1-7/8-inch wide guide plate, which mounts to the rear section’s bottom flange, provides a 3/4-inch lip for added support to the center section when the cabinet is open or closed. The plate also ensures that an equipment-weighted center section will close properly, by “guiding” alignment pins into respective holes.
Ratings and reviews
