AtlasIED 316-15 19-Inch Wide Opening Stand-Alone Wall Cabinet

AtlasIED 316-15 19-Inch Wide Opening Stand-Alone Wall Cabinet

The AtlasIED 316-15 19-inch Wide Opening Stand-Alone Wall Cabinet is welded with center-section depths of 12-inch and 15-inch, respectively. This model includes three, 16-gauge CRS sections which include a 2-inch deep, solid-steel front door, a 12-inch or 15-inch deep center section with adjustable mounting rails, and a 4 1/2-inch deep rear door. Panel space openings range from 7 RU to 35 RU. Enclosures are equipped with provisions for custom cabinet mounting, wire man­agement, equipment mounting, and structural support.

Measurement

AtlasIED 316-15 19-inch Wide Opening Stand-Alone Wall Cabinet includes adjustable front rack rails tapped 10–32, and manufactured to standard E.I.A. 1/2-inch spacing. It is equipped with center section mounting rail supports.

Equipment

Internal open raceways provide cable pathways in the cabinet. Corner brace supports, which straddle the back and side panel of the rear section (hinge side), also feature round (1 1/4-inch diameter) wire access holes for harnessing excess wire. The back face of the rear section is equipped with 1/4-inch deep boss detents which gives field flexibility to install a custom plywood, aluminum, or steel sub-plate for mounting accessories inside the cabinet. Boss detents are on 12-inch centers and vary depending upon model height (10RU, 12RU, and 16RU models have four detents, 24RU models have six detents and 35RU models have eight detents).

Conduit Arrays

The AtlasIED 316-15 19-inch Wide Opening Stand-Alone Wall Cabinet has 20 conduit knockouts on the rear section. Conduit arrays are located at the top and bottom of the back panel, as well as on the top and bottom back flanges. Panel arrays consist of four knockouts: two 1-inch (25mm) standard and two 1/2-inch (13mm) / 3/4-inch (19mm) concentric. Top and bottom flange arrays are comprised of six knockouts: three 1-inch (25mm) standard and three 1/2-inch (13mm) / 3/4-inch (19mm) concentric.

Perforated Vents

Perforated vents, located on both sides (top and bottom) of the center section, provide ventilation for rack-mounted electronics.

Structural Support

The cabinets offer exceptional structural support. The units’ one-piece front and rear sections are strengthened with frame flanges on the bottom, top, and sides. Center sections are plug-welded, joining bottom and top panels to side panels. Rear sections have corner brace supports which bridge the back and side panel (hinge side) giving the back (mounted) panel extra reinforcement for tension relief.

Reinforcement

AtlasIED 316-15 19-inch Wide Opening Stand-Alone Wall Cabinet also has electric-welded seams and miters which increases the cabinets’ overall bonding. The center section offers maximum reinforcement provisions, such as a uniquely designed center section guide plate that reduces potential sagging by distributing cabinet and equipment weight to rear section. The 11-gauge, 1 7/8-inch wide guide plate, which mounts to the rear section’s bottom flange, provides a 3/4-inch lip for added support to the center section when the cabinet is open or closed. The plate also ensures that an equipment-weighted center section will close properly, by “guiding-inch alignment pins into respective holes.