- In-wall or surface mount
- Designed specifically to accommodate half rack width
- 16-gauge CRS construction
- Two-position, tilt-out 16-gauge CRS locking door
AtlasIED AWR2W-HR Tilt Out Half Rack 2RU Wall Cabinet
Atlas AWR2-HR Tilt Out Half Rack 2RU Wall Cabinet offers convenient access, lock-in security, and welded construction that can be surface or recessed mounted.
The AWR2W-HR is designed to install within standard 16 inch stud wall construction, reducing installation time and the need to cut and repair dry wall.
The cabinet features a 18-gauge CRS formed door frame with a 18-gauge CRS locking tilt-out door which closes flush against the rack face plate. The surface mount door is attached to the frame internally with 2 pin style hinges to prevent tampering.
The door can be opened to two positions, tilt-out for operation, and by releasing side catches, the door will open to approximately 90 degree for equipment installation and maintenance. Units are furnished with two steel safety catch cables that suspend and hold doors at 90 degree.
The back box is 18-gauge CRS and is equipped with six eight concentric 1⁄2 inch and 3⁄4 inch conduit knockouts. The 12-gauge CRS Rack rail mounting holes accept 10-32 hardware.