AtlasIED IPDSC-DSE+ PoE+ Dual Sided Wall or Ceiling Mount LED Display
Product highlights:
- Auto registration and auto provisioning
- 16 x 64 LED dot matrix display
- Network controlled, high visibility red LED display
- Multicast enabled network clock control
- Cisco SRST compliant
- Power using IEEE802.3af compliant PoE+ switch
- RJ-45 female input on PCB
AtlasIED IPDSC-DSE+ PoE+ Dual Sided Wall or Ceiling Mount LED Display
The AtlasIED IPDSC-DSE+ PoE+ Dual Sided Wall or Ceiling Mount LED Display is an indoor dual-sided display incorporating speakers and an LED flasher. It can display time as well as scrolling text and leverages the VoIP communication solution to extend notifications with effective visual text alerts for high ambient noise areas or large spaces.
Ergonomics
The AtlasIED IPDSC-DSE+ registers as a communication endpoint directly within InformaCast, SA-Announce, and GCK advanced notification applications, supporting both visual text and audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, scheduled announcements, and intercom while leveraging the WAN/LAN network architecture.
Cisco Environment
When used within a Cisco Environment, these same IP dual-sided LED displays with speakers from AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).
Mechanism
When receiving an emergency notification, the flasher on the IPDSC-DSE+ becomes active and blinks. When the emergency notification is complete, the IPDSC-DSE+ flasher stops blinking. In addition to visual signaling, the IPDSC-DSE+ can provide audio via its integrated speakers or to support distributed analog public address systems with the convenience of line-level audio outputs. This line-level output is ideal for use with AtlasIED AA, PA, DPA, or CP series amplifiers to power large zones of traditional 25V, 70.7V, or 100V AtlasIED speakers or paging horn speakers.
Functionality
It also includes 2 GPI inputs, 1 GPI output, and microphone input for talkback or listen to applications. The GPI/O ports offer triggering for critical alert notification or unified connectivity of third-party systems. Under Title II of the ADA, all state and local governments are required to take steps and ensure effective communication to people with disabilities. The AtlasIED IPDSC-DSE+ is an indoor dual-sided display incorporating speakers and a flasher that provides effective communication for all individuals.
Ratings and reviews
