AtlasIED PoE+ Indoor Wall Mount IP Speaker with LCD Display and Talkback Microphone

AtlasIED PoE+ Indoor Wall Mount IP Speaker with LCD Display and Talkback Microphone

AtlasIED IPX Series IP-SDM indoor wall mount IP speaker with a display and talkback leverage the VoIP Communication solution to extend tele-presence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces. This indoor speaker is fitted with an 8-inch coaxial speaker that is optimized for voice intelligibility. AtlasIED IPX Series IP-SDM indoor wall mount IP speaker consists of a factory assembled speaker, grill, and PCB amp/control board that is securely mounted to the rear of the grill.

Communication

AtlasIED IP-SDM registers as a communication endpoint directly within InformaCast, and Revolution Advanced Notification applications, supporting both visual text and audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, scheduled announcements and intercom, while leveraging the WAN/LAN Network Architecture. 

Installation

When used within a Cisco Environment, this speaker can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).

Material Used

The Grills for the IP-SDM IP speakers are made of 18-gauge metal construction that provides security and durability in commercial applications. The baffle is finished in neutral white electrostatic powder coat and is packaged with all necessary mounting screws.

Display

While in Standby, the IP-SDM displays time and eliminates the need for a separate master clock system by utilizing national time synchronization protocol (NTP) to stay up to date. When active, the IP-SDM display changes from time to visual notifications by Scrolling text content over the LCD digital readout.  

Microphone

IP-SDM includes an omnidirectional sub-miniature, electret condenser microphone that is mounted behind the grill’s steel perforation material adjacent to the speaker to allow two-way communication and/or monitoring from the speaker location to any PC or phone handset.

Communication Security

The IP-SDM features auto-registration. This is an easy and time-saving way to configure our IP speakers on your Voice VLAN, similar to a VoIP handset. By sitting on the same VLAN, both VoIP phones and IP speakers share the same Quality of Service (QoS) so communications are always secure and guaranteed. Includes GPI/O ports offer a trigger for critical alert notification, or unified connectivity of third-party systems.