AtlasIED Single POE+ IP-To-Analog Gateway with Integrated Amplifier and Rack Mount Kit

AtlasIED Single POE+ IP-To-Analog Gateway with Integrated Amplifier and Rack Mount Kit

The AtlasIED IPX Series IP-to-analog gateway is perfect for connecting unified communication platforms to off-network analog third-party systems, including, but not limited to, sending notifications to analog overhead paging, trigger or be triggered by access-control systems, assist to fire alarm, and two-way audio support for video-surveillance, simply plug and play. Model IP-ZCM1RMK includes a rack mount kit for properly mounting the IP-ZCM in a standard width rack.

 Communication

AtlasIED IP-ZCM1RMK registers as a communication endpoint directly within InformaCast, and SA-Announce Advanced Notification applications, supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, and scheduled announcements, while leveraging the WAN/LAN network architecture. 

Installation

When used within a Cisco Environment, this speaker from AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).

Applications

Where 3rd party notification applications are not required, the IP-ZCM1RMK IP–to–Analog Gateway can register as SIP devices directly to a SIP server or VoIP Communications Manager for critical alerts /public address applications.

Factory Assembled PCB Control Board

The IP-ZCM1RMK from AtlasIED consists of a factory assembled PCB control board housed in a rugged and compact 1RU chassis. The unit provides the same addressable endpoint functionality as an IP speaker or IP phone with the convenience of line-level and amplified audio output. This line-level output is ideal for use with AtlasIED AA, PA, or CP series amplifiers to power large zones of traditional 25V, 70.7V, or 100V AtlasIED speakers or paging horn speakers.

Output

In addition to the line-level output, the IP-ZCM1RMK provides 1-channel of 15-Watt RMS at 8-ohm or, 70.7V amplified output to drive a small cluster of analog speakers. It also includes 2 GPI Inputs, 1 GPI Output, and Microphone input for talkback or listen to applications.

Communication Security

The IP-ZCM1RMK features include Auto-provisioning and auto-registration. This is an easy and time-saving way to configure our IP speakers on your Voice VLAN, similar to a VoIP handset. By sitting on the same VLAN, both VoIP phones and IP speakers share the same Quality of Service (QoS) so communications are always secure and guaranteed.