Dbx Di4 Active 4-Channel Direct Box with Line Mixer Bundle with XLR (4-Pack) and TS Cables (4-Pack)
Product highlights:
- Four totally independent DI box units in 1/2 RU package
- Independent 20dB pad switch per channel
- Independent ground (earth) lift switch per channel
- Independent volume control per channel for line mixer output
- Independent pan control per channel for line mixer output
- Master volume
- Headphone output
In the box
Dbx Di4 Active 4-Channel Direct Box with Line Mixer
- Dbx Di4 Active 4-Channel Direct Box with Line Mixer
- Limited 2-Year Warranty
4 X Pig Hog 1/4-Inch to 1/4-Inch TS Guitar Cable (10-Feet)
- Pig Hog 1/4-Inch to 1/4-Inch TS Guitar Cable (10-Feet)
- Limited Lifetime Warranty
4 X Knox Gear 25Ft XLR Cable Male to XLR Female Microphone Cable
- Knox Gear 25-Feet XLR Male to XLR Female Microphone Cable
- Limited 1-Year Warranty
Dbx Di4 Active 4-Channel Direct Box with Line Mixer Bundle with XLR (4-Pack) and TS Cables (4-Pack)
The dbx Di4 Active 4-Channel Direct Box with Line Mixer is designed to be used as a standard tool for many audio applications. This bundle from Focus Camera includes Dbx Di4 Active 4-Channel Direct Box with Line Mixer, four XLR cables, and four TS cables.
Dbx Di4 Active 4-Channel Direct Box with Line Mixer
The dbx Di4 Active 4-Channel Direct Box with Line Mixer is designed to be used as a standard tool for many audio applications. Offering four channels, the Di4 easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles and more. The Di4 also functions as multi-channel stereo line mixer. This feature allows you to connect all your keyboards, samplers and modules into just one rack unit on stage and supply independent XLR balanced outputs to the stage box for a front of house engineer and set your own independent mix for stage monitoring. The Di4 also offers a headphone output.
Using the dbx Di4 as a DI Box
Connect the signal you would like to convert from unbalanced to balanced to the Di4 via a 1/4-inch unbalanced jack to one of the channel inputs on the front panel of the unit. Connect an XLR balanced cable to the corresponding channel output on the rear of the Di4 and connect to your chosen destination. If the input signal strength is too high you can depress the 20dB pad. If there is an ground (earth) loop hum you can remove by depressing the earth lift switch.
Using the dbx Di4 as a Line Mixer
You can mix volume and pan of all input signals to a single stereo pair of RCA connections on the rear of the Di4. This enables use of the unit as a fully functional line mixer. Just connect the RCA stereo master outputs on the rear to your chosen destination and adjust the individual volume and pan controls for each individual channel on the front of the Di4 to suit your needs.
Pig Hog 1/4-Inch to 1/4-Inch TS Guitar Cable (10-Feet)
This Pig Hog 1/4-Inch to 1/4-Inch TS Guitar Cable is precisely overbuilt to stand up to the most grueling tour conditions imaginable and is designed to provide the highest quality performance with outstanding value. Cables need to sound great and perform reliably, night after night, without costing you an arm or a leg! That’s why an extra-thick, yet supple 8mm jacket that resists kinking or tangling is used to craft this cable.
High-Tech and Sturdy
It is made using Pig Hog’s proprietary conductor technology and robust shielding for long-lasting performance.
Crisp Sound
This guitar cable ensures your sound is crystal clear, without noise or interference, every time.
Tested for Brilliance
Each straight-to-straight guitar cable is hand tested before shipment, to ensure pristine quality. So you can be sure your Pig Hog Cable will be an integral part of your setup for years to come.
Knox Gear 25Ft XLR Cable Male to XLR Female Microphone Cable
Knox Gear 25FT XLR Male - XLR Female Microphone Cable, is professionally designed to prevent external interference and ensure signals travel rapidly and smoothly with minimum distortion, delay, or loss. These cables feature two 20-gauge CCAM conductors, which are twisted pair with cotton yarn fillers, conductive PVC shield with 100% coverage, and CCAM spiral shielding with 90% coverage.
Ratings and reviews
