Product highlights:
- Powerful amplification with tons of headroom
- Equipped with the new EBM
- Ported enclosure
- Ideal for home and professional studios
In the box
Presonus 10-Inch Active Subwoofer with Built-In Crossover
- Presonus 10-Inch Active Subwoofer with Built-In Crossover
- Owner Manual
- Limited 1-Year Warranty
2 X PreSonus Eris E7 XT 6.5-Inch 2-Way Active Studio Monitor with Wave Guide
- PreSonus Eris E7 XT 6.5-Inch 2-Way Active Studio Monitor with Wave Guide
- Power Cord
- Studio One Prime Software
- Studio Magic Plug-In Suite
- Limited 1-Year Warranty
PreSonus MicroStation BT 2.1 Monitor Controller with Bluetooth
- PreSonus MicroStation BT 2.1 Monitor Controller with Bluetooth
- Limited 1-Year Warranty
3 X Knox Gear 1/4in TRS to 1/4inTRS Cable (6-Feet)
- Knox Gear 1/4in. TRS to 1/4in. TRS Cable (6-Feet)
- Knox Gear 1-Year Warranty
Presonus 10-Inch Active Subwoofer with Built-In Crossover
Powerful and musical, Temblor T10 active, front-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of tubbiness or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end so that you can produce your best mix from top to bottom.
Tight, Clean, Responsive Bass
The Temblor T10’s glass-composite low-frequency driver delivers tight and responsive bass, thanks to its lightweight and rigid cone. This design also provides lower distortion than other materials, ensuring that the sub-bass reproduction in your monitoring system is as coherent and clear as your full-range monitors.
Perfect Fit with Your Full-Range Monitors
Temblor-series subwoofers make integrating a subwoofer into your monitoring setup easy so you can create the flattest possible response. The Temblor T10 provides a continuously variable lowpass filter (50 Hz to 130 Hz), allowing you to create a seamless crossover transition between your full-range studio monitors and subwoofer for the most accurate listening environment possible.
Central Hub of Your Monitoring Setup
Temblor T10 subwoofers provide the connections and controls necessary to act as the central hub for a basic monitoring setup. A switchable highpass filter on the full-range outputs helps to avoid frequency cancellation and reinforcement in the subwoofer’s upper range. A polarity invert ensures your system is in phase. The Temblor T10 also features a momentary footswitch (included), making it easy to compare your mix with or without sub-bass frequencies and ensure it will sound good on a wide variety of systems.
Accuracy Defined
When you hear the low-frequency foundation of your mix accurately, you can make more informed decisions and create more translatable mixes. Temblor T10 subwoofers are the natural sub-bass extension for virtually any full-range monitoring system.
PreSonus Eris E7 XT 6.5-Inch 2-Way Active Studio Monitor with Wave Guide
With their smooth, accurate frequency response; powerful amplification with tons of headroom; and acoustic tuning functions that ensure you always get the best sound, it's no wonder that Eris-series studio monitors have been a runaway hit since their introduction. The Eris E7 XT builds on the Eris XT series, adding big, controlled bass in a compact form that will fit into a studio of nearly any size. Deep lows and a wide, more controlled sweet spot (thanks to its EBM waveguide design) mean that our best-selling studio monitors just got even better.
Studio Speakers with a Wide Sweet Spot
PreSonus outfitted the Eris XT studio monitor with a new EBM (Elliptical Boundary Modeled) waveguide designed by none other than Hugh Sarvis of WorxAudio, the mind behind our award-winning CDL loudspeakers and lauded R-series monitors. The result? A superior high-frequency response and wider 100-degree horizontal dispersion create a broader sweet spot that's ideal for group listening and collaboration. Narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.
Bass That’s Just Right
The familiar woven composite low-frequency driver offers Eris' signature tight, clear bass, with plenty of punch and no flab. Eris E7 XT studio monitors sport a ported enclosure that is designed to maximize bass in a compact cabinet, allowing them to reach down to an astonishing 42Hz, with no subwoofer!
Set Up Your Studio Monitor for Your Room
Modern recording studios can be anywhere from a spare bedroom to a multi-million dollar facility. That's why every studio monitor PreSonus makes, is equipped with controls that ensure the flattest response in your mixed environment. Acoustic tuning controls allow you to configure the Eris E7 XT perfectly for your room: You get Low-cut, Mid, and High controls, as well as 3-way Acoustic Space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.
Studio Monitor Connections
It’s easy to feed audio to your Eris E7 XT studio monitor from an audio interface, mixer, monitor controller, or almost any other line-level source. Eris E7 XT monitor provides balanced XLR, balanced 1/4-inch TRS, and unbalanced RCA line-level inputs. You’ll have no problem hooking your Eris speaker up to virtually anything.
Accuracy Defined
Suitable for both home recording studios and professional mix engineering, Eris XT studio monitor combines sterling audio quality with the flexible tuning and connectivity you've come to expect from PreSonus. It’s Eris remastered.
PreSonus MicroStation BT 2.1 Monitor Controller with Bluetooth
PreSonus MicroStation BT 2.1 Monitor Controller with Bluetooth is the ultimate solution for anyone who wants to add Bluetooth connectivity to their favorite pair of studio or media reference monitors. A convenient Bluetooth receiver lets you wirelessly stream audio to any pair of studio or media reference monitors right from your phone. Balanced ¼ inch TRS inputs are provided to connect pro audio hardware, like your audio interface. A stereo ⅛ inch input is available to hardwire your phone or tablet when you don’t want to use Bluetooth. MicroStation BT is ideal for creating a simple 2.1 system. A convenient, large volume knob lets you control the overall level of your speakers and sub at the same time. The Sub Bypass button lets you switch back to simple stereo listening whenever you like. A headphone output and Main Mute let you silence your speakers without stopping the tunes.
Compact and Convenient
Compact, convenient, and stylish–with flexible connectivity and easy-to-use controls, MicroStation BT will make you wonder how you listened without it. Upgrade nearly any stereo listening setup to a 2.1 system with a subwoofer and Bluetooth connectivity; Balanced ¼ inch TRS inputs for connecting to professional audio interfaces plus stereo ⅛ inch Aux In for mobile devices; Small footprint doesn’t clutter your workspace; intuitive and simple controls; Sub Bypass lets you mute the subwoofer without crawling under your desk; Aux/Phones Out for quiet, late-night listening or mix session.
The Little Magic Box
MicroStation BT is the best solution to add Bluetooth connectivity to their studio or media reference monitors. Compact, convenient, and stylish, MicroStation BT also makes it easy to add a subwoofer to create a 2.1 listening space while putting the system level control right under your fingers.
A Wireless Input For Your Wired Speakers
A convenient Bluetooth input lets you wirelessly stream audio to any pair of studio or media reference monitors right from your phone. Balanced ¼ inch TRS inputs are provided to connect pro audio hardware, like your audio interface. A stereo ⅛ inch input is available to hardwire your phone or tablet when you don’t want to use Bluetooth.
Boom In Your Room
MicroStation BT is ideal for creating a simple 2.1 system. A convenient, large knob lets you control the overall level of your speakers and sub at the same time. The Sub Bypass button lets you switch back to simple stereo listening whenever you like. A headphone output and Main Mute let you silence your speakers without stopping the tunes. Don’t let its size fool you. With flexible connectivity and easy-to-use controls, MicroStation BT will make you wonder how you listened without it.
Knox Gear 1/4in TRS to 1/4inTRS Cable (6-Feet)
Knox Gear 1/4in TRS to 1/4in TRS Cable (6-Feet) is a heavy-duty cable for connecting your guitar or other electric instrument to an amplifier.
Ideal for Gigging
At 6 feet long, this cable is perfect for touring or live sound applications. This male-to-male cable can be attached to any standard amplifier from a guitar, bass, electric keyboard or other compatible instrument.