Ibanez SR Standard 6-String Electric Bass (Right-Handed, Brown Mahogany)

Ibanez SR Standard 6-String Electric Bass (Right-Handed, Brown Mahogany)

The Ibanez SR Standard 6-String Electric Bass incorporates all the staples the Ibanez brand is famous for, such as fast necks, floating terms, and high-octane distortion in a package that is available and accessible to most players.

Rosewood Fretboard

Rosewood provides a well-balanced solid tone with a focused mid-range.

Accu-Cast B500 Bridge

The Accu-cast B500 bridge has adjustable saddles for variable string spacing by +/- 1.5mm, answering every bassist’s specific string spacing needs.

Bartolini BH2 Pickups

The Bartolini BH2 pickups provide a tight bottom-end, punchy mid-range, and smooth response. The dual-coil style configuration maximizes articulation and a long blade pole piece widens the magnetic field, providing a balanced string-to-string pickup response.

Ibanez Custom Electronics 3-Band EQ with EQ Bypass Switch and Mid Frequency Switch

Ibanez Custom Electronics 3-band EQ is the latest refinement on the concept of simple, straightforward, no-nonsense EQ control. The Boost and Cut for the Mid Control are each centered on slightly different frequencies, an innovation that delivers a preset range of the most favorable bass tones. Precision tonal control, including a switch to choose passive-only operation. When the EQ bypasses are activated, the treble tone control knob becomes the global tone control for the passive circuit.

Control

With the bass held in the playing position, there are three small knobs located toward the lower edge of the body. Directionally, from the lower bout towards the neck, these knobs control treble boost/cut, mid boost/cut, and bass boost/cut knob. Above these are two larger knobs closer to the bridge. Of these, the knob closest to the end of the body is the pickup balance, and the knob located towards the neck is the volume knob. There are two switches on this bass. The switch closest to the lower edge of the body is a 3-way mid-frequency switch. When the switch is in the neck position, the mid-boost peak is at 250Hz. When the switch is in the center position, the mid-boost peak is at 450Hz. When the switch is in the bridge position, the mid-boost peak is at 800Hz. The other switch closer to the middle of the bass is the EQ bypass switch. When the switch is in the neck position, the EQ is off. When the switch is in the bridge position, EQ is on. When EQ is off, the treble knob works as a passive tone control knob.

Frequency Response

The bass boost/cut frequency curve has a peak at 20 Hz, the variable width becomes smaller toward the high range, and the variable width becomes zero at about 1000 Hz. The variable range of the peak frequency is approximately ±15 dB. The treble boost/cut frequency curve draws a mountain-shaped curve with a peak at around 10,000 Hz and a zero variable range of around 100 Hz. The variable range of the peak frequency is approximately ±15 dB. The mid-boost/cut frequency curve creates a bell-shaped curve that peaks at a specific frequency, and the variable range becomes zero near 20 Hz and around 10,000 Hz. The frequency peak can be switched to 700, 450, and 250 Hz. The variable range of the peak frequency is approximately ±15 dB.