Orange Amps Super Crush 100W Guitar Amplifier Head (Black) with 120W 2x12" Cabinet and Cables

Orange Amps PPC212 120W 2X12-Inch Closed Back Cabinet with Celestion Vintage 30 Speakers (Black)

Orange Amps PPC212 is a closed-back 2×12-inch cabinet equal in width to the PPC412. Featuring two Celestion Vintage 30 speakers, the PPC212 is essentially a classic 4×12 slashed in half. The large internal volume of the sealed enclosure makes the PPC212 ideal for players looking for the fattest possible tone when a 4×12-inch would be too large. Many players choose to stack two PPC212 cabs for ease of load-in, also giving them the flexibility of using just one for smaller venues. Made in England from high-density 13-ply 18mm Baltic birch plywood, the PPC212 is fitted with steel hardware to withstand the rigors of the road. Unique skid runners held to the base help to acoustically couple cabinets to the stage for a fuller low-end response.

Built for a Life on the Road

With formidable construction and a tight, unflappable sound, the PPC212 is essentially a PPC412 cut in half allowing ease of use in smaller venues while retaining the fattest possible tone.

Celestion Vintage 30 Speakers

Superb tones and a tight response require a first-rate speaker.

Classic Orange Styling

Finished in legendary livery dating back to 1968, the PPC212 features basket weave vinyl, woven speaker grille cloth, signature ‘picture frame’ edging, and 18mm Birch ply construction.

Orange Amps Super Crush 100W Guitar Amplifier Head (Black)

The Orange Amps Super Crush 100W Guitar Amplifier Head uses high-quality analog circuitry to deliver all the immediacy, definition, and character that you would expect from any of our top-of-the-range valve amps. It’s a solid-state done right. Building on the huge success of the Crush Pro solid-state amplifiers, the Super Crush 100 takes this now-classic recipe and goes a step further in the search for a valve-like tone. Though equipped with all the same features as the original amp, the Super Crush 100 is a completely new design, proving that a lot of small improvements can make a BIG difference and there’s a CabSim balanced output too.

Mechanism

With its single-ended, 2-channel JFET preamp design and 100-watt Class A/B power amp, the Super Crush 100 mimics the huge, rich and responsive tone of our flagship Rockerverb amps in a solid state. From clean to heavy high gain, there’s no shortage of Orange mojo. Touch-sensitive dynamics and lush harmonic overtones sing out of this amp with such authority and musicality that you’d swear there were valves inside.

High Gain and High Versatility

Two completely independent, all-analog preamp channels give you instant access to a whole spectrum of warm, valve-like tones. From high-headroom clean to high-gain metal, every sound you could ever need is dialed in with ease, thanks to a versatile circuit and intuitively simple control layout. The Dirty Channel boasts four cascading stages of proper Orange gain, along with a passive 3-band EQ. Just like its all-valve stablemates, the Super Crush 100’s Dirty Channel can hammer out punishing heavy tones and also clean right up, whether you’re riding the guitar volume knob or the amp’s wide-ranging gain control. The Clean Channel is a bright, vintage-flavored, two-stage design. There’s plenty of headroom, keeping your clean tones shimmering and clear at any level, with the option of cranking the volume up into fat, bluesy crunch.

100W of Solid State Mojo

A solid state doesn’t have to be lifeless. The Super Crush 100 uses the tried and tested 100W Class A/B power amp from our Pedal Baby 100 to deliver all the dynamics, presence, and feel of a big valve amp. Filling big stages is not a problem thanks to massive headroom, fantastic articulation, and relentless punch.

Direct and To-The-Point

The Super Crush 100 features a balanced XLR output with our CabSim speaker emulation technology. Mimicking the sound of a 2 x12 cab, this no-nonsense, all-analog filter gives you instant access to a great D.I. guitar tone, straight into the P.A. or recording interface. The Cab Back switch selects between the sound of an open or closed back cab, homing in on your perfect direct sound quicker than you can say ‘I don’t need a mic’.

Built-In Reverb and Fully-Buffered FX Loop

An onboard digital reverb module provides a lush, spring reverb ambiance, adding a deep and shimmering finishing touch to your sound. The fully-buffered, ultra-transparent, series FX Loop takes care of all your effects needs, accommodating even the most outlandish signal chains without ever compromising your carefully-crafted tone.

Pig Hog - PH10R - 1/4" - 1/4" Right Angle 8mm Instrument Cable (10 ft., Black)

Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable and are designed to provide the highest quality performance with outstanding value. Your cables need to sound great and perform reliably, night after night, without costing you an arm or a leg! The Pig Hog 1/4" - 1/4" Right Angle Instrument Cable has an extra-thick, yet supple 8mm jacket that resists kinking or tangling. The proprietary conductor technology and robust shielding is designed to ensure your sound is crystal clear, without noise or interference, every time. Each cable is hand tested before shipment, and we back up our quality with a lifetime warranty so you can be sure your Pig Hog Cables will be an integral part of your rig for years to come.

Pig Hog Speaker Cable, 3ft (14 Gauge Wire)

The Pig Hog Speaker Cable is precisely overbuilt to stand up to the most grueling tour conditions imaginable and is designed to provide the highest quality performance with outstanding value. It uses an extra-thick, yet supple 8mm jacket that resists kinking or tangling. Proprietary conductor technology and robust shielding are designed to ensure your sound is crystal clear, without noise or interference, every time. Each cable is hand-tested before shipment.