Microphone Accessories
Shop Microphones
SE Electronics DM2 TNT Active In-Line Mic Preamp with High-Grade FETs and Eight Load Settings
- Active in-line mic preamp
- Consistent gain of 15dB plus or explosive 30dB plus of gain
- Sophisticated class-A design
- Specially-selected high-grade FETs
- 8 load settings from 50 ohms to 10 mega ohms
- All-metal housing and premium finish
-
Gold plated XLR connector
Pay over time for orders over $300 with Affirm.
Universal Audio 710 Twin-Finity Radical UA Mic Preamplifier with Dual Gain-Stage Control
- Twin-Finity tone-blending mic or line preamp
- Hi-Z instrument DI with dual-path 310 volt class-a tube
- Transimpedance solid state preamp
- Phase-aligned ‘tone-blending’ of tube and solid state
- Dual gain stages - wire with gain to creamy to crunchy
- Monolithic balanced output stage
- Output and ‘Drive’ backlit VU metering
- Portable, rack-mountable design for studio, desktop or stage
- Universal internal power supply
- Heavy-duty metal construction
Starting at $91/mo
DJI Mic 2 Charging Case
- Charges two transmitters and one receiver to reach up to 18 hours of operating time
- Stores transmitters, a receiver, and mobile phone adapters (USB-C and Lightning) for convenient carrying
- Automatically links the receiver and transmitters
- Compatible with DJI Mic 2
Pay over time for orders over $300 with Affirm.
On Stage MS7701B Euro Boom Microphone Stand (Black)
- Folding legs with plastic endcaps for reduced vibrations
- Steel midpoint locking clutch adjusts height from 32 to 61.5 inch
- 30-inch removable boom arm allows for easy positioning
- Steel-reinforced plastic leg housing offers exceptional strength
- Zinc mid-point clutch and black finish
Pay over time for orders over $300 with Affirm.
Knox Gear Pop Filter for Broadcasting and Recording Microphones
- For broadcasting and recording microphones
- Eliminates thuds and pops
- Clean sound every time
- Protects the microphone from saliva
- Gooseneck for precise positioning
- Adjustable clamp easily attaches to any mic stand
Pay over time for orders over $300 with Affirm.
Knox Gear Shock Mount for Blue Yeti and Yeti Pro Microphones (Black)
- Designed for use with Blue Yeti and Yeti Pro mics
- Reduces or eliminates vibrations and mechanical noise
- Fully adjustable hinge lets you position the mic at any angle
- 3/8-inch-16 threading for use with most mic boom arms
- Padded rear stopper to hold Yeti in the perfect position
- Sturdy metal construction with high-tension elastic cables
Pay over time for orders over $300 with Affirm.
SE RF-X Portable Isolation Filter X (Gray)
- Instant vocal booth for any home studio
- Lightweight vented body
- Features a four-layer acoustic filter design
- Efficient, redesigned clamp assembly
- Versatile product suited for challenging working environment
- Filters frequencies evenly across the whole spectrum
Pay over time for orders over $300 with Affirm.
Universal Audio UA-710TF Twin-Finity Mic Preamplifier Nundle with XLR Cables (4 items)
- Twin-Finity tone-blending mic or line preamp
- Hi-Z instrument DI with dual-path 310 volt class-a tube
- Transimpedance solid state preamp
- Phase-aligned ‘tone-blending’ of tube and solid state
- Dual gain stages - wire with gain to creamy to crunchy
- Monolithic balanced output stage
- Output and ‘Drive’ backlit VU metering
- Portable, rack-mountable design for studio, desktop or stage
- Universal internal power supply
- Heavy-duty metal construction
Starting at $92/mo
Audient EVO SP8 8-Channel Smart LCD Mic Preamp with AD-DA Convertor, and Channel Status Indication
- 8 channels Mic preamps with 8 line outputs
- 2 JFET instrument inputs with 2 ADAT inputs and outputs
- Class-leading AD and DA converters
- Multi-channel smart gain
- ‘EVO Motion UI’ control system
- High-resolution LCD screen
- One knob centralized control
- Ultra-clear metering and input and output control
- Channel status indication and optional rack ears
- Word clock input and 24bit at 96 kHz
Starting at $47/mo
Blue Microphones Yeti Red USB Mic with Knox Boom Arm, Headphones and Pop Filter
- Ultimate professional USB microphone
- Three condenser capsules can record almost any situation
- Gain control, mute button, zero-latency headphone output
- Unique positionable design
- Hassle-free setup and recording
- Cardioid, bidirectional, omnidirectional and stereo
- Perfect for vocals, instruments, Podcasting and more
- Plug 'n Play - Mac and PC compatible
Pay over time for orders over $300 with Affirm.
Knox Gear Pop Filter for Yeti Microphones
- Specifically designed for Blue Yeti microphone
- Also compatible with other desktop microphones
- Eliminates thuds and pops
- Clean sound every time
- Gooseneck for precise positioning
Pay over time for orders over $300 with Affirm.
Knox Gear Microphone Suspension Boom Scissor Arm with Knox Gear Yeti Mic Shock Mount - Black
- Rugged steel construction keeps microphones steady to eliminate vibration
- Supports up to 3.2 lbs. of weight
- Arm extends 14” horizontally and vertically
- The arm provides a total reach of 27.5”
- C-clamp is wide enough to fit on surfaces up to 1.75” thick
- 3/8” Threading withiIncluded 3/8” to 5/8” adapter
Pay over time for orders over $300 with Affirm.
Knox Gear 30-inch Microphone Desktop Boom Arm (Black)
- Smooth and comfortable setup
- Scissor arm suspension microphone stand
- 30-inch arm extension horizontally or vertically
- Universal compatible with 5/8-inch copper thread
- Rotates 360 degrees and holds up to 5 pounds
- Two-axis swivel mount for accurate positioning
- Up to 2.5-inch desk thickness
- For recording, podcast, streaming, and broadcasting
- Steel tubing ensures strength and long life
Pay over time for orders over $300 with Affirm.
Knox Gear Shock Mount for Blue Snowball and Snowball Ice Microphones
- For Blue Snowball and Snowball Ice Microphones
- Flexes its corded muscles to combat vibrations
- Steel frame ensures strength and long life
- Steel clamp with locking knob
Pay over time for orders over $300 with Affirm.
SKB Music iSeries Waterproof 12-Mic Case with Storage Compartment
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant
- Gasket seal makes the case absolutely watertight
- Automatic ambient pressure equalization value
- Resistant to corrosion and impact damage
- Molded-in hinges
- Patented trigger release TSA Locking Latch system
- Rubber over-molded cushion grip carrying handle
- Custom cut to accommodate 12 microphones vertically
Pay over time for orders over $300 with Affirm.
Rode MagClip GO Magnetic Clip for Wireless GO (Black)
- Compatible with the Rode Wireless GO
- Powerful magnetic clip system
- Can be used to place the mic discreetly
Pay over time for orders over $300 with Affirm.
Knox Gear Shock Mount for Blue Yeti X Microphone
- Designed for use with Blue Yeti X microphone
- Reduces or eliminates vibrations and mechanical noise
- Fully adjustable hinge lets you position the mic at any angle
- Padded rear stopper to hold Yeti in the perfect position
- Sturdy metal construction with high-tension elastic cables
- Can be easily attached to most boom arms
Pay over time for orders over $300 with Affirm.
SE Electronics DM1-MIC-PRE Dynamite Active In-Line Preamp
- Provides a massive +28dB of clean, transparent gain
- Features a state of the art electronics and high-grade FETs
- Slim design allows for easy placement in the studio
- Gold plated XLR connector for loss-free signal connection
- Roadworthy and robust construction
- Transformerless design helps in making pristine sound quality
- Perfect for podcasting, recording, or live sound
Pay over time for orders over $300 with Affirm.
Rode Blimp Windshield and Shock Mount System for Shotgun Microphones
- Compatible with Rode shotgun microphones
- Works on third-party shotgun microphone up to 325mm in length
- Features Rycote Lyre suspension system for superior isolation
- Features ultra-lightweight and ergonomic handle
- Mogami cable reduces transference of vibration to microphone
- Attaches to any standard boom pole
Pay over time for orders over $300 with Affirm.
Shure Molded Plastic Case with Drops and TSA-Accepted Latches for 15 Wired Microphones
- Fits up to 15 Shure or other wired microphones
- TSA-accepted locking latch is ideal for air travel
- Foam-padded microphone drops
- Internal storage compartment for cables and accessories
- Heavy-duty polyethylene construction
- Ergo-grip injection-molded handle
- Black powder-coated hardware and continuous valance
Pay over time for orders over $300 with Affirm.
Shure Molded Plastic Case with Drops and TSA-Accepted Latches for 30 Wired Microphones
- Fits up to 30 Shure or other wired microphones
- TSA-accepted locking latch is ideal for air travel
- Foam-padded microphone drops
- Internal storage compartment for cables and accessories
- Heavy-duty polyethylene construction
- Ergo-grip injection-molded handle
- Black powder-coated hardware and continuous valance
Pay over time for orders over $300 with Affirm.
Shure Molded Plastic Case with TSA-Accepted Latches for 7 Wireless Microphones and Accessories
- Fits up to 7 wireless mics with storage for accessories
- TSA-accepted locking latch is ideal for air travel
- Protective foam-lined interiors
- Two lift-out trays and four adjustable dividers
- Heavy-duty polyethylene construction
- Ergo-grip injection-molded handle
- Black powder-coated hardware and continuous valance
Pay over time for orders over $300 with Affirm.
Shure SBC80-903 8-Bay Battery Charger for SB903 Lithium-Ion Battery with LED Charge Indicators
- Recharging stations with 8 bays
- Made for SB903 rechargeable batteries
- Fits in a rack mount drawer
- Recharges batteries in 3 hours
- LED indicator to show battery status
Starting at $32/mo
On Stage MY100 Unbreakable Dynamic Rubber Mic Clip
- Tapered style for dynamic mics
- Break resistant rubber construction
- 5/8-inch-27 female threaded insert in plastic base
- Specially designed interior diamond pattern
- Fits standard 5/8"-27 mic stands, goose-necks, and booms
Pay over time for orders over $300 with Affirm.
Knox Gear Microphone Shock Mount and Detachable Pop Filter - Fits Audio Technica AT2020 Mic
- Holds microphone steady during recording
- Reduces unwanted noise
- Minimizes external vibrations
- Compatible with Audio Technica 2020 and other microphones
- High-quality materials
- Easy-to-use functionality
- Suitable for podcasting, streaming, voice and video recording
- 3/8-inch and 5/8-inch microphone stand connector
Pay over time for orders over $300 with Affirm.