Godox TT350N Mini Thinklite TTL Flash for Nikon Cameras

Godox TT350N Mini Thinklite TTL Flash for Nikon Cameras

The Godox TT350N Mini Thinklite TTL Flash for Nikon Cameras is a small and light flash gun with a guide number of 36 that fits perfectly with mirrorless and compact cameras. It weighs only 200g and when mounted on the camera and pointing the head forward has only 95mm high. Despite its small size, its flash head rotates 270-degree horizontally and 97-degree vertically. This allows a lot of freedom in reflecting the flash light from the ceiling and walls regardless of the camera's orientation of pictures in the portrait and horizontal frame.

Transmitter

The lamp has built-in Godox X system transmitter it can be used as a controller (Master) of other lamps using the Godox X system. It is also possible to switch it to the Slave mode, in which it can be controlled remotely from other Godox X transmitter.

Modes

The flash gun Godox TT350 is equipped with three modes of operation. The first of them (TTL) allows you to shoot with the use of automatic selection of flash light power and work with all the automatic and semi-automatic modes available in cameras. The second option is manual mode with S1 and S2 mode selection. The third mode-strobe (Multi) is great for taking effective photos at longer exposure times.

Mechanism

The flash gun Godox TT350 offers the ability to sync flash with ultra-fast shutter speeds up to 1/8000s ( HSS ). This option is especially appreciated by people who want to use the lamp during outdoor sessions, where very often you have to face intense ambient light. The built-in zoom in manual and automatic mode works in the range of 24-105 mm. If you need to illuminate a wider plan, you can use the wide-angle diffuser built into the head, which corresponds to a focal length of 15mm. In addition, the lamp is equipped with a reflector. In addition, the set comes with an additional light softening cover, which will be useful, e.g. when taking pictures with the torch pointing straight ahead. The factory set is completed with a stand and a handy cover. The battery compartment has a micro USB connector, which is used to update the firmware of the lamp.