Reloop Turn X Premium HiFi Turntable with ADAM Audio T5V Monitors (Pair), Stands (Pair), and Brush

Reloop Turn X Premium HiFi Clear Sound Quality Accurate and Consistent Speeds Turntable (Black)

Reloop's Turn X is a quartz-driven, high-end turntable that impresses in more ways than just its sound and premium aesthetics.

Designed with Precision from the Outset

The Turn X's direct-drive DC motor offers incredibly accurate and consistent speeds. The high torque ensures lightning-fast start-up times and minimal variances of just +/-0.03 percent. The Turn X excels when operated in full manual mode, where it's an electronic brake and rotary switch for smooth starting and stopping, which also doubles as a speed selector (33, 45, and 78 RPM), and shine.

Balance Perfection

A solid aluminum block supports the record player's precision-machined die-cast platter. Its hefty 2.1 kg, 332 mm diameter, and 22.5 mm thickness ensure smooth, even movement. The damping rubber coating on the back of the turntable and the rubber mat provides excellent isolation properties and minimizes vibrations.

Audiophile Tonearm

The statically balanced S-shaped tonearm can be adjusted in height to change the cartridge's azimuth (the angle at which the needle approaches the record) and the record's vertical tracking angle (VTA). The tonearm design guarantees free and fluid movement and optimum cartridge performance.

Crystal Clear Sound Quality

The Turn X has a high-quality Ortofon 2M Blue cartridge pre-installed, ensuring excellent dynamics and sound resolution to satisfy even the most discerning audiophiles. Another highlight the universal SME connector enables a quick and easy cartridge system change if required.

Design without Compromise

In addition to meeting the exacting demands of vinyl enthusiasts, the Reloop Turn X is a true visual showpiece. The record player's sleek design, sophisticated one-button control, and classy piano lacquer finish make it a real eye-catcher.

Sound and Nothing But Sound

The turntable's solid MDF chassis is exceptionally sturdy and robust, keeping unwanted resonances at bay from the outset. As a bonus, the Turn X has effectively decoupled thanks to the height-adjustable isolator feet.

Attention to Detail

The Turn X features a gold-plated high-resolution phono output and a gold-plated ground connector for optimum signal transfer and corrosion resistance. Interference is reduced even further by the power switch's ultra-low noise insulation.

Adam Audio T5V Active Nearfield Monitor

The Adam Audio T5V Active Nearfield Monitor is a highly affordable two-way nearfield monitor optimized for small control rooms.

Ergonomics

With its 5-inch woofer, the bass frequency response of the T5V extends to 45 Hz. The new U-ART tweeter, a breakthrough solution for use in high-resolution recording and mixing on a budget, goes up to 25 kHz and is mated to a precision waveguide with the same dispersion-control attributes as the high-frequency propagation (HPS) waveguide used in Adam Audio’s flagship S Series monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working.

Mechanism

A beveled cabinet with a rear-firing bass reflex port and a small footprint allows placement anywhere in your room, no matter how small, and contains built-in DSP-controlled driver crossovers and equalization as well as multi-way analog connections. Powered with a 50 W Class D amplifier for the woofer and a 20 W Class D amplifier for the U-ART tweeter, the T5V produces SPLs of up to 106 dB per pair. Excellent acoustic characteristics, small dimensions, and an outstanding cost/performance ratio make this studio monitor perfectly suited for use in small control rooms in music, video, and broadcast production.

U-ART 1.9-Inch Accelerated Ribbon Tweeter

The new U-ART 1.9-inch accelerated ribbon tweeter, as used in the T Series, is made of a high-tech polyimide film and provides pristine and extended high-frequency response up to 25 kHz,virtually unheard of in monitors in this price range, and a breakthrough solution for use in high-resolution recording and mixing on a budget. Unlike a conventional dome or cone tweeter that uses a piston action to move air and reproduce sound, the U-ART tweeter uses a pleated ribbon that alternately draws air into its folds and squeezes it out like the folds respectively expand apart and press together in response to the inputted audio signal. This design produces four times as much air movement as does a piston-based design, creating higher sound pressure levels (SPLs) with lower distortion.

High-Frequency Propagation System

The HPS (High-frequency Propagation System) waveguide was initially designed at ADAM Audio for the S-Art of the S series range with the aid of the latest computer modeling techniques. It hones the dispersion of the speakers to an even, uniform consistency, broad in the horizontal axis but tightly focused in the vertical plane. This minimizes potentially distracting reflections from the horizontal surfaces of significant studio furniture (for example mixing consoles), ensures that imaging remains constant, and creates a large, well-controlled, and stable ‘sweet spot’, even at high output levels.

Pulse Width Modulation

The PWM (Pulse Width Modulation) sometimes referred to as Class D amplification, sometimes called Switching Amp Technology converts the incoming signal to a series of rectangular waveforms of equal height. The width of the rectangles varies in time and the relation of the width of the rectangles represents the musical signal. This waveform can be amplified much more simply, as the transistors are not modulated anymore; instead, they are used as switches that only turn the power supply voltage on and off. It is possible that a very fast mechanical switch could do the job, but power transistors are a better choice for the task, so PWM amplifiers still work pretty much like conventional Class AB designs.

On Stage SMS7500B Wood Studio Height Adjustable Non-Slip Monitor Stands (2-Pack, Black)

This pair of On Stage SMS7500 Wood Studio Monitor Stands reliably supports heavy monitor speakers weighing up to 90 pounds each, holding them at the desired level and angle for mixing, mastering, and playback.

Material

Made of wood and available in a black finish, these sturdy stands deliver a refined, furniture-like visual presentation that enhances the professional appearance of any recording studio, home theater, or listening space.

Adjustable Height

The height of each stand adjusts from 35.5 to 56.5 inches, enabling balanced, precise speaker placement that optimizes sound in a variety of spaces and accommodates listening while seated or standing.

Prevents Skidding or Sliding

The nonslip padding on the platforms protects the speaker cabinets from dents and scratches, dampens vibrations to maintain the natural sound of the speakers, and prevents skidding or sliding to keep the speakers safely in place.

Outstanding Stability

The wide 16-inch bases sit flat and maximize contact with the floor for a solid foundation that provides outstanding stability on hard floors or carpets. Enjoy all the practical features you need along with the classic looks your space deserves.

Knox Gear Vinyl Carbon Fiber Anti-Static Record Brush

If you're one of the many music lovers and audiophiles that love to listen to vinyl, then this product is an essential addition to your record collection. Whether new or vintage, your vinyl will eventually become dusty, dirty and build up static. This brush from Knox Gear is specifically designed to both clean vinyl and remove static from the disc. It's easy to use. Just place the record on your turntable and fire it up. As it rotates, gently place the brush on the vinyl and let it do its thing. After a few rotations, pull it off and clean the brush. It's as easy as that!