SmallHD 1303 HDR 13-Inch Production Monitor

SmallHD 1303 HDR 13-Inch Production Monitor

Display

• Panel type: IPS
• Diagonal size: 13
• Resolution: 1920x1080
• Pixel density: 170 PPI
• Aspect ratio: 16:9
• Active area: 11.59 x 6.52 inch
• Brightness: 1500 nits
• Contrast: 1140:1
• Gamut: 100% Rec.709
• Color depth: 10-bit (8+2)
• Viewing angle: 178 Deg.
• Backlight type: LED
• Adjustable backlight: Yes
• Adaptive color (YN): No
• DCI-P3 color: 100% Rec.709

Input Signal

• 3G-SDI input types: YCC 4:2:2 @ 10 bits: 1080p60, 1080p59.94, 1080p50, 1080i120, 1080i119.88, 1080i100
• HD-SDI input types: YCC 4:2:2 @ 10 bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psF30, 1080psF29.97, 1080psF25, 1080psF24, 1080psF23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98
• SD-SDI input types: 480i29.97, 576i25
• HDMI input types: Supports YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB and YCC 4:4:4: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98,1080i120, 1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p100, 720p60, 720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p100, 480p60, 480p59.94, 576p100, 576p50
• Component input types: Not supported
• Composite input types: Not supported
• Audio input types: HDMI and SDI ­ Monitor through Speakers in Front Bezel or through Headphone Jack ­ Metering up to 8 channels

Output Signal

• 3G-SDI output types: YCC 4:2:2 1080p60, 1080p59.94, 1080p50, 1080i120, 1080i119.88,
• HD-SDI output types: YCC 4:2:2 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98 all at 8 bits
• SD-SDI output types: Not Supported
• HDMI output types: Supports YCC 4:2:2@ 8 bits, RGB and YCC 4:4:4 @ 8 bits: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25, 1080p24, 1080p23.98,1080i120, 1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p100, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p100, 480p60, 480p59.94, 576p100, 576p50, 480i120, 480i119.88, 480i60, 480i59.94, 576i100, 576i50
• Component output types: Not supported
• Composite output types: Not supported
• Audio output types: Audio sent downstream unless a LUT is loaded on the output page which disables Audio out.

Connector Type

• SDI: 2x 3G Inputs, 2x 3G Outputs
• HDMI: 1x Input, 1x Output
• Component: Not supported
• Composite: Not supported
• Audio: 1x Headphone Jack on Front of Monitor
• Power in: 1x XLR 4­pin Input 12­-34VDC, 1x Lemo Output 12VDC @ 4A Max
• Power out: 1x XLR 4­pin Input 12­-34VDC, 1x Lemo Output 12VDC @ 4A Max
• USB: 1x Front USB2, 2x Rear USB2

Controls

• Primary: Joystick Navigation, Dedicated Back Button. Additional Dedicated buttons for Image Capture; LUT Selection; Backlight Level; Input Selection; Scopes Toggle
• Record Capture: Dedicated Image Capture Button on Front Bezel

Data I/O

• Storage media: SD Card for LUTs, Captured Images, Image Overlays, Profile Saving, and Loading, Firmware Upgrades
• USB: 1 Front and 2 Rear USB Ports for power (1.5A shared total), LUT Loading, Profile Saving, and Loading

Power

• Connector: 1x XLR 4-pin 12 - 34VDC IN; 12V Lemo 2-pin OUT 4A Max
• Voltage: 12 - 34VDC
• Consumption: 25 - 39W
• Power supply: AC - DC Power Converter “Brick” Included with Monitor 110 - 240VAC 50 - 60 HZ INPUT; 15V - 6A OUTPUT
• Battery types: Gold Mount / V­Mount via 4­pin XLR Connector
• Output voltage: 12V, 2A max via LEMO Connector
• Power plug-in: 1x XLR 4-pin 12 - 34VDC IN; 12V Lemo 2-pin OUT 4A Max

Software

• Pixel zoom: 2x and 4x Zoom with smooth pan via joystick
• Frame guides: Yes: Preset Aspect Ratios and Customizable
• DSLR scale: Canon 5DMkii and Canon 7D
• Custom scale: Yes: Underscan and Overscan
• Anamorphic de-squeeze: Yes: 1.33x, 1.5x, 1.66x, 2.0x
• Image rotate: Yes - Automatic or Manual
• Image flip: Yes - Automatic or Manual
• Cross conversion: Yes: HDMI → SDI and SDI → HDMI
• Focus assist: User Adjustable Color Style and Intensity
• Peaking: User Adjustable Intensity
• False-color: Rainbow and Arri Style
• Zebra: Dual-user configurable
• Waveform: Luma and RGB Style, Fully User Customizable with Region of Interest Highlighting
• Vectorscope: Yes with Optional Skintone line
• RGB parade: Fully User Customizable
• Histogram: Luma and RGB Style
• Image capture: With Dedicated Button
• Custom LUTS: Loadable by Page or as Systemwide Color Calibration
• LUT downstream: Available on SDI 1 or HDMI Out
• LUT import: Via SD Card or USB Storage Device
• Overlay: Yes with Intensity Slider and Blink Setting
• Firmware: User Upgradable. Compatible with 1303-1703-2403-3203 Firmware Version 1.1 and later
• Audio meters: Yes ­ HDMI and SDI up to 8 channel