SmallRig Side Handle Kit for Nikon Z6/Z7

SmallRig Side Handle Kit for Nikon Z6/Z7

SmallRig Left Side Wooden Grip with Nato Mount 2118 includes Left Side Wooden Grip 1891 and Nato Clamp with Arri Rosette 2046. This bundle from Focus Camera includes the SmallRig 2118 Left Side Wooden Grip with Nato Mount, a cage for atmos ninja v, a cage for a camera, a monitor mount, an HDMI cable clamp, a sun hood, a Nato rail, and a cold shoe extension.

SmallRig 2118 Left Side Wooden Grip with Nato Mount

SmallRig Left Side Wooden Grip with Nato Mount 2118 includes Left Side Wooden Grip 1891 and Nato Clamp with Arri Rosette 2046. The wooden grip is well-made of a handcrafted rosewood and curved ergonomically. When it works with the Nato clamp, it can be attached to the Nato rail of the cage. The Quick-release-featured Nato clamp with the Arri rosette allows flexible adjustment in height and angles for a better hand-held shooting experience.

SmallRig 2209 Cage for Atomos Ninja V

SmallRig Cage for Atomos Ninja V 2209 was co-designed with Atomos to provide an additional protective exoskeleton for the monitor, with a wide range of industry-standard mount points.

Designed for Atomos Ninja V

The cage mounts to the monitor by a 1/4-inch-20 screw on the top and two M3 screws on the left side. Across the top and bottom, the cage features multiple 1/4-inch-20, 3/8-inch-16 holes, and an ARRI locating mount point on the base. Nato rails are also provided along on both top and bottom to allow use with a range of SmallRig mounts such as SmallRig Ball Head Magic Arm 2071 or 2072 for quick release.

Features

The cage includes a single HDMI cable clamp that works with a range of cables and is ideal for the AtomFlex 4k 60p cables. If required, the cage supports the use of a second SmallRig HDMI Cable Clamp 1693 for the HDMI output. It is attached to the left to protect the HDMI cable and port.

Backward Compatible

For backward compatibility with Atomos Master Caddy II, the cage also features Drive locks that incorporate the additional size of standard 2.5-inch drives into the cage’s form factor. It features raised attachment points on both the top and bottom of the cage for use with neck straps and to accommodate the Atomos Ninja V Sunhood frame.

SmallRig Cage for Nikon Z6/Nikon Z7 Camera

SmallRig Cage for Nikon Z6/ Nikon Z7 Camera 2243 is a form-fitted cage which is designed to provide all-around protection and mounting options for Nikon Z6 and Z7. The cage is fixed on the camera via the bottom 1/4-inch-20 threaded hole and features an m2.5 threaded hole on the left side as a second lock point to prevent the camera form twisting. The one piece aluminum cage features multiple 1/4-inch-20, 3/8-inch-16 and ARRI 3/8-inch threaded holes for accessories attachment. Additionally, it features a cold shoe on the top for microphone mount and a NATO rail on the left allows for quick release your setup. The bottom features multiple 1/4-inch-20 and one 3/8-inch-16 threaded holes allows for mounting tripod plates. The cage features two M-four threaded holes which is used to mount FTZ Lens Adater Mount 2244 to protect the lens mount. Optional Arca Baseplate 2092 could be attached to the bottom for 15mm LWS system, as well as the cable clamp 1679 to protect the HDMI port.

SmallRig 2205 Monitor Mount with Nato Clamp

SmallRig Monitor Mount with Nato Clamp 2205 is designed to hold your monitor onto a camera cage via the Nato clamp, it allows you to mount any monitor cage with Nato rail at the bottom to any camera cage with Nato rail on the top. The quick-release monitor mount enables you to adjust the position of the monitor up to 150-degree without using tools. The lightweight mount can support the monitor up to 1.5kg.

SmallRig 1679 HDMI Cable Clamp for Sony a7II/a7RII/a7SII

SmallRig HDMI Cable Clamp 1679 is specially designed for the SmallRig Sony series camera cage, cannon cage. Attached to the cage with two 1/4-inch-20 screws, it prevents the HDMI cable from accidentally dropping. Moreover, this HDMI lock is equipped with two M5 threaded holes to lock the USB Cable with screws.

SmallRig 2269 Sun Hood for Atomos Ninja V

SmallRig 2269 Sun Hood for Atomos Ninja V is a dedicated sun hood fitted into the SmallRig Cage 2209 by four strap tapes, which are easy to take on and removed. It helps to provide a great viewing experience even in harsh lighting conditions.

SmallRig 2172 Mini Quick Release NATO Rail (48mm)

SmallRig 2172 Mini Quick Release NATO Rail (48mm) is the one of the thinnest NATO rail in the market. Fixed by 1/4-Inch-20 screws to devices such as camera, monitor, wireless video transmitter or receiver, etc., it works with SmallRig NATO clamps for quick attachment and release. It features safety pins on both ends to prevent accessories from accidentally sliding off. This quick release NATO rail is low profile so there is no need to remove it before putting your devices back into cases.

SmallRig 2044B Cold Shoe Extension

This kit includes a 1/4-inch counterbore slot and a cold shoe. The 1/4-inch counterbore slot can be mounted on the 1/4-inch threaded holes on the right side of Sony A6500 Cage 1889. The arrowheads on the cold shoe point to an anti-off direction. The cold shoe is compatible with the RODE microphone, wireless microphone, and RODE SVMX microphone. The cold shoe extends beyond the cage, thus it will not block the buttons and ports of the cage.