- Rolling Glide cam is 40 percent lighter
- Cobra Coil solves the problem of heavy sluggish action
- Features a smaller diameter but thicker beater head
- Swivel Spring Tight recaptures lost energy
- Hinge Guard Block minimizes stress and maximizes smoothness
- Oiles bearings create far less friction
- Quick-Hook allows maximum power transmission
Tama Iron Cobra 900 Rolling Glide Double Pedal
The Iron Cobra achieved its legendary status because of its ability to strongly support both the artistic and logistical requirements associated with the art of drumming. Since its inception smooth, effortless performance and unparalleled response have been hallmarks of the Iron Cobra.
To keep left-side double pedals from walking, a special stabilizer is mounted to the outside frame. This augments the stability of the floor anchor bolts.
Rolling Glide LiteSprocket
The Rolling Glide cam is a true round sprocket that provides smooth, consistent action throughout the entire course of the beater stroke. 40 percent lighter than the previous cam, it gives the Iron Cobra a lighter yet more controllable feel.
Until now, the only way to adjust your beater stroke action was to tighten the pedal spring. That results in heavy, sluggish action. The Cobra Coil solves the problem by adding a steel return spring. The return spring constantly presses the footboard to its original position, tightening the relationship between foot and pedal. Even better, the Cobra Coil is adjustable to different positions on the Iron Cobra footboard base plate.
Power-Strike Cobra Beater
The latest version of Iron Cobra features a smaller diameter but thicker beater head. A combination that delivers more attacks than previous designs. Also, the distance between the beater head's face and the shaft has been increased. Drummers found this alteration improved their sense of control during faster passages.
Swivel Spring Tight
The conventional approach to the spring assembly has been to anchor the bottom of the spring while the top of the spring is being pulled from various angles throughout the pedal's cycle. But a spring being pulled on at an angle represents wasted energy and causes turbulence. The Swivel Spring Tight assembly solves this problem, recapturing that lost energy and optimizing smoothness through the use of a contoured assembly that allows the base to swivel freely with the spring. This enables a straight spring pull during the pedal's entire cycle, resulting in the smoothest, lightest action ever found on a bass drum pedal.
Hinge Guard Block
The construction of the Bearing Hinge on the footplate has been changed from a one-piece assembly to two pieces, which holds the bearing more evenly. This minimizes stress and maximizes smoothness while adding to the pedal's sense of power.
Oiles Bearing Hinge
To reinforce durability, the Iron Cobra 900 Series features a thicker 6 mm diameter shaft. Oiles bearings create far less friction than standard ball bearings. They also eliminate unwanted side-to-side motion while providing superior durability.
Vari-Pitch Beater Holder
Vari-Pitch beater angle adjustments are completely independent of the footboard angle. The Speedo-Ring allows you to adjust the angle of the footboard link independently of the beater angle. The combination of the Speedo-Ring and the Vari-Pitch offers a range of incremental adjustments that will satisfy any style.
Tama eliminated another source of friction by replacing the traditional nylon rocker cam with the Speedo-Ring, a rocker cam with a high-quality built-in ball-bearing rocker. The Quick-Hook not only allows for easy setup and tear-down but also streamlines the pedal, allowing quick stowaway in the hard case without removing the beater.
Quick-Hook not only allows rapid spring attachment and reattachment for rapid set up and tear down, but it also eliminates wobbling and allows maximum power transmission to the Speedo-Ring. And you never have to worry about it slipping off during the performance.
You know what pedals go through night after night. After being stomped on over and over, they get thrown in bags and road cases where there's more hard rock and roll than the gig itself. That's why precision instruments like Iron Cobras come with a specially designed protective carrying case. Amazingly, no one thought of it before.
Para-Clamp II Pro
Tama now introduces Para-Clamp II -an even more clever and useful version of the popular original. The Para-Clamp II is capable of gripping the widest variety of bass drum hoops ever. The improvement is largely due to its newly designed three-dimensional rubber grip. Holding power is increased and the possibility of scratching the hoop is eliminated. Furthermore, set-up and breakdown are easily facilitated, while sitting on a throne because the T-bolt of the Para-Clamp II Pro is on the side of the footboard, rather than under it.