Vortex Razor HD Gen II-E 1-6x24 Riflescope (VMR-2 MOA Reticle) with 30mm Cantilever Mount

Vortex Cantilever Mount for 30mm Riflescope Tubes with 2-Inch Offset

Ideal for use alongside your Vortex Riflescope, this Vortex Cantilever Mount was engineered to fit 30mm flattop-style riflescope tubes. It has a 2-inch offset that positions the scope in a forward position, allowing for correct eye relief and head placement.

Easy Installation

Easy to install, the cantilever mount was designed to hold tight to the base for proper sight alignment. The cantilever mount positions the center of the riflescope tube at a height of 1.59-inch from the base to give you the correct height and forward placement for proper scope mounting on 30mm maintubes. The cantilever conveniently mounts to standard Picatinny rails.

Durable Build

Forged from highly durable yet lightweight aluminum alloy, this cantilever mount was built to last. A hard-coat type III anodized coating gives you long lasting performance from the precision-crafted Sport Cantilever Mount with 2-Inch Offset.

Vortex Razor HD Gen II-E 1-6x24 Riflescope (VMR-2 MOA Reticle)

Vortex Optics riflescopes boast extreme durability, high mechanical precision, and superior high-definition optics. The Razor HD Gen II-E 1-6x24 Riflescope was carefully crafted and meticulously designed to make this rifle scope the ideal optical solution for short-to-medium range tactical applications. The Razor HD Gen II-E 1-6x24 Riflescope (VMR-2 MOA Reticle) brings you exceptional image quality thanks to the high density (HD) extra-low dispersion optical glass. The 24mm objective lens features a special apochromatic design (APO) that uses index-matched lenses to deliver a natural color balance. The Vortex Razor HD Riflescope comes with Vortex Optics' VIP Warranty.

Superior Optics

Razor HD Gen II-E Riflescope lenses are multi-coated with XR Plus anti-reflection coatings for maximum light transmission and minimum glare on all air-to-glass surfaces. Achieve higher color contrast, sharper images, and superior light transmission thanks to the APO system combined with the HD lenses. The coating application process uses cutting edge Plasma technology for unparalleled coating durability and performance. The glass-etched illuminated reticle was designed to provide precise aiming even in low light conditions.

VMR-2 MOA Reticle

The VMR-2 MOA Reticle is constructed in the second focal plane and maximizes long-distance shooting and ranging abilities for your Razor HD Gen II Riflescope. The illuminated reticle was marked using MOA based subtension lines for ranging, holdover, and windage corrections; the ultra-precision laser etching on the glass reticle is kept to the tightest tolerances possible. The Razor HD's fully-illuminated crosshair was carefully designed for optimum balance between precision aiming and light visibility. The VMR-2 has a max windage adjustment level of 150 MOA and a max elevation adjustment level of 150 MOA.

Durable Build

Constructed out of aircraft-grade aluminum, this Vortex Optics Riflescope has a tube size diameter of 30mm in a single-piece tube designed to maximize alignment for improved accuracy and optical performance. A tough hard-coat anodization combined with ArmorTek exterior coating exterior helps protect your scope protects against bumps, bruises, scratches, oil, and dirt while O-ring seals and Argon gas purging create a waterproof, dustproof, and shockproof body.

Internal Mechanisms

Large diameter turrets give you extreme control of this rifle scope for fast and accurate elevation and wind adjustments thanks in-part to the integrated locking mechanism that prevents accidental adjustments. The Razor HD Gen II-E 1-6x24 Riflescope has a Friction Reduction system with heat-treated, hardened steel pads that interface with the steel ring on the erector tube for direct steel-on-steel contact that prevents galling or deformation of the erector screw contact point. The turret screw give you a low-friction, wear-resistant performance for smooth operation and adjustments.