Vortex Strike Eagle 1-6x24 Riflescope and Cantilever Mount for 30mm Riflescope Tubes

Vortex Strike Eagle 1-6x24 Riflescope and Cantilever Mount for 30mm Riflescope Tubes

Get the most out of your outdoor hunting adventures with the Vortex Strike Eagle 1-6x24 Riflescope and Cantilever Mount for 30mm Riflescope Tubes with 2-Inch Offset Bundle from Focus Camera. The Vortex Strike Eagle 1-6x24 Riflescope features 1-6x magnification in 24mm objective lens and has a glass-etched, illuminated BDC3 reticle. Vortex Cantilever Mount was engineered to fit 30mm flattop-style riflescope tubes and is ideal for use alongside your Vortex Riflescope.

Vortex Strike Eagle 1-6x24 Riflescope (BDC3 Reticle)

Perfectly suitable for law enforcement and tactical shooting, the Strike Eagle Riflescope from Vortex is packed with exciting set of features in updated aesthetics for a clean, new look. It utilizes multi-coated optics optimally placed inside a 30mm long tube for improved color tone, brightness and contrast. The Armortek scratch-resistant coating on the exterior lenses protects their surface from scratches, oil, and dirt.

Illuminated BDC3 Reticle

The Strike Eagle 1-6x24 Riflescope comes with a glass-etched, illuminated BDC3 reticle. This reticle is placed in the second focal plane. Its subtension marking with 0-650 yards ranging references and holdovers both allow for rapid shooting at near as well as far distances.

Additional Features

The scope’s true 1x magnification on the low end adapts to a wide range of scenarios for rapidly engaging targets from point-blank to extended ranges. An integrated thread-in throw lever helps you to set your magnification even faster, shot after shot.

Vortex Cantilever Mount for 30mm Riflescope Tubes with 2-Inch Offset

Ideal for use alongside your Vortex Riflescope, this Vortex Cantilever Mount was engineered to fit 30mm flattop-style riflescope tubes. It has a 2-inch offset that positions the scope in a forward position, allowing for correct eye relief and head placement.

Easy Installation

Easy to install, the cantilever mount was designed to hold tight to the base for proper sight alignment. The cantilever mount positions the center of the riflescope tube at a height of 1.59-inch from the base to give you the correct height and forward placement for proper scope mounting on 30mm maintubes. The cantilever conveniently mounts to standard Picatinny rails.

Durable Build

Forged from highly durable yet lightweight aluminum alloy, this cantilever mount was built to last. A hard-coat type III anodized coating gives you long lasting performance from the precision-crafted Sport Cantilever Mount with 2-Inch Offset.