Yamaha PX10 Power Amplifier (1200 Watts x 2 at 4 Ohms)


Starting at $105/mo or 0% APR.

Need help deciding? Contact us right now!

In the box

Yamaha PX10 Power Amplifier (1200 Watts x 2 at 4 Ohms)

  • Yamaha PX10 Power Amplifier (1200 Watts x 2 at 4Ohms)
  • USB Cover
  • Specification Sheet
  • AC Cable (2m)
  • Owner's Manual
  • Limited 1-Year Warranty

From The Wavelength Blog Read more

Yamaha PX10 Power Amplifier (1200 Watts x 2 at 4 Ohms)

The Yamaha PX10 Power Amplifier combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. This amplifier continues this tradition of excellence, utilizing Yamaha’s renowned digital signal processing technology and unparalleled professional audio expertise to achieve a light, durable design, capable of delivering the maximum output power to the speakers while simultaneously protecting them with optimized processing.

Class-D Amplifier

Driven by a Class-D amplifier engine, the Yamaha PX10 Power Amplifier is suitable for a broad range of sound reinforcement and installation environments. This engine concentrates all the necessary functions into a single custom LSI chip and uses PLL technology to control transfer characteristics in real-time, achieving impressive sound quality and power. This single-chip architecture offers higher output and improved performance in a more lightweight, yet reliable design. A combination of cutting-edge technology and an exhaustive component selection process make the amplifier supremely efficient amplifiers with low noise, reliable protection features, and above all, outstanding sound quality.

Sophisticated Signal Processing

This amplifier comes with flexible onboard crossover, filters, delay, limiter, and PEQ (fixed preset) functions as standard, allowing quick and easy system setup via the LCD, without the need for any additional outboard gear. It also features Yamaha’s intelligent D-CONTOUR multi-band dynamic processing, allowing users to achieve consistent clarity and high-quality sound for either front-of-house or monitor configurations.

Easy, Intuitive Setup

To accommodate users with varying levels of sound reinforcement experience, this amplifier offers both Basic and Advanced setup modes. Basic mode allows even inexperienced users to easily configure a system that meets their needs, while Advanced mode offers experienced users more precise control over every aspect of their sound. It features eight programmable presets for instant recall and reduced setup time that can be saved to a USB thumb drive and shared with other PX amplifiers

Smart Configuration Wizard

The Config Wizard allows users to save even more time during system setup by assigning optimized speaker settings that match your system configuration simply select the appropriate filter and crossover for each speaker, and Config Wizard will do the rest. Config Wizard also features presets* specifically tuned for each model in Yamaha’s extensive lineup of passive speakers, including the popular CBR, Club, Installation, and VXS/VXC series, and an advanced mode that allows more detailed configuration of parameters such as input routing, input sensitivity, amp gain, and speaker impedance.

Flexible Connectivity, Durable Construction

Equipped with both XLR and TRS inputs, and binding post, SpeakON, and phone outputs, this amplifier offers the flexibility needed for a variety of setups and environments, and the durability to stand up to extended road use thanks to the sturdy chassis and carrying handle design.

Utilities for Safe and Secure Operation

It is fast and easy to configure panel settings, monitor amplifier status, and transfer data via USB, and also features a panel locking function to keep your settings safe. Users can even export information such as internal devices and log data to USB for rapid troubleshooting should difficulties arise.

Yamaha PX10 Power Amplifier

100V Models

  • Output power; 1kHz Non-clip 20msec Burst Both channels driven
    • 8 Ohms: 1000W x 2
    • 4 Ohms: 1200W x 2
    • 2 Ohms: 700W x 2

120V Models

  • Output power; 1kHz Non-clip 20msec Burst Both channels driven
    • 8 Ohms: 1000W x 2
    • 4 Ohms: 1200W x 2
    • 2 Ohms: 700W x 2

220V-240V Models

  • Output power; 1kHz Non-clip 20msec Burst Both channels driven
    • 8 Ohms: 1000W x 2
    • 4 Ohms: 1200W x 2
    • 2 Ohms: 700W x 2

General Specifications

  • Sampling frequency rate:
    • Internal: 48kHz
  • A/D D/A converters: AD/DA: 24-bit linear, 128 times over sampling
  • Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)         
  • Frequency response: ±1.0dB (1W, 8 Ohms, 20Hz to 20kHz)
  • S/N ratio: 101dB (A-weighted, 8 Ohms, Gain setting = +14dBu)
  • Crosstalk: Less than -60dB (Half Power, 8 Ohms, 1kHz, Vol max input 150 Ohms shunt)
  • Voltage gain/sensitivity:
    • 8 Ohms volume max: 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu)        
  • Maximum input voltage: +24dBu
  • Input impedance: 20 kOhms (Balance), 10 kOhms (Unbalance)
  • I/O Connectors:
    • Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4 inch PHONE(TS) x2
    • Line input: XLR-3-31 x2, 1/4 inch PHONE(TRS) x2
    • Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp          
  • Indicators: POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature
  • Processors: Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz to 20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)
  • Latency: 1.5 msec (Analog Input to Speakers)
  • Presets: 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers)
  • Protection circuit:
    • Load protection: Power switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically)   
    • Amplifier protection: Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically)
    • Power supply protection: Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown         
  • Amplifier class: Class D, Balanced output circuit (BTL)
  • Cooling: 16-step variable speed fan x 2, front to rear airflow
  • Power requirements: Depending on the area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz (Verified as operating at rated power voltage +/- 10% voltage.)
  • Power consumption: 310W (1/8 MAX power, 4 Ohms, Pink noise at all channels), 60W (4 Ohms, Idling)
  • Dimensions:
    • Weight: 18-7/8 inch (480mm)
    • Height: 3-7/16 inch (88mm), 2U
    • Depth: 15-2/8 inch (388mm)
  • Net weight: 16.31 lb (7.4 kg)
  • Temperature:
    • Operating Temperature: 0-degree-Celsius to +40-degree-Celsius
    • Storage temperature: -20-degree-Celsius to +60-degree-Celsius

Same Day Shipping

All orders placed by 4PM( EST), Monday through Thursday, and by 11AM (EST) on Friday, are shipped same day. Orders placed outside these times will ship the next business day. We do not ship internationally or to Puerto Rico, Guam and other US territories at this time. For more details click here.

Free Two-Day Shipping

We offer free expedited shipping on thousands of items within the continental USA (this does not include Alaska and Hawaii).

Flexible, Easy Returns

If you're not happy with your purchase for any reason, our flexible 30-day free return policy makes it easy to get a full refund. Click here to view our return policy.

Ratings and reviews