The Yamaha HS7 is a high-quality studio monitor with advanced transducers and response controls. It provides accurate and even sound reproduction with exceptional clarity across the audio spectrum. It is bundled with a pair of Adjustable Studio Monitor Stands, Two 1/4-Inch TRS to XLR Male to Male Balanced Cables (10-Feet) and Two 25Ft XLR Cable Male to XLR Female Microphone Cables.

Yamaha HS7 95 Watt Professional Powered Studio Monitor Speaker (Black)

The Yamaha HS7 is a 2-way bass-reflex bi-amplified near-field powered studio monitor with stunning accuracy and exceptionally flat response. The HS Series features newly developed transducers that achieve astonishingly smooth responses over a wide range of bandwidth. These transducers utilize an advanced magnetic field design that regulates the flow of magnetic response to provide seamless, natural sonic transitions. Each component's materials and design were carefully re-examined, then optimized, to drastically improve the accuracy of signal reproduction throughout the audio spectrum. HS Series speakers employ an amplifier unit perfectly matched to the transducers utilized in each model of the series. HS Series full-range models feature two response controls with detailed settings that allow them to adapt to the surface acoustics of rooms of varying shapes and sizes. Room control allows you to attenuate the unnatural, exaggerated low-end that can often occur when speakers are placed next to walls, while high trim allows for more flexible control of the high-frequency response. 

Tweeter

The HS Series features a newly designed, highly efficient 1-inch dome tweeter that extends the usable frequency range considerably and delivers superb high-resolution sound. Utilizing a thick wave guide designed to minimize vibration the new tweeter is able to deliver smooth, distortion-free high end up to 30 kHz. 

Woofer

With newly designed, ultra-responsive woofers that utilize large, carefully selected magnets, HS Series monitors produce low distortion sound with a well-defined bottom end at any output level. All of the components in these high-power woofers, including the woofer ring and the basket, further contribute to the HS Series' stunning bass while providing clear, accurate mids.

High-Performance Amp Unit

Featuring a bi-amp design with a separate dedicated amp for both the woofer and the tweeter, this amplifier unit ensures that each HS Series speaker consistently delivers high-resolution sound with exceptionally flat responses across the sound spectrum.

Low Resonance Enclosure Design

HS Series cabinets are designed to eliminate unwanted resonance and increase the accuracy of sound reproduction to their extreme limit. The enclosures are constructed from a very dense and resilient MDF with a damped acoustic response that is perfectly suited for reference monitors. Drawing from Yamaha's over 100 years of piano design experience, HS Series engineers also employed a traditional three-way mitered-joint technique.

Noise Reduction

By adopting an advanced noise reduction technology that incorporates a thorough analysis of a visual representation of the sound, Yamaha's engineers are able to control and reduce the vortex. 

Yamaha HS8S 150 Watt Professional Powered Subwoofer (Black)

The HS Series features newly developed transducers that achieve astonishingly smooth response over a wide range of bandwidth. These transducers utilize an advanced magnetic field design that regulates the flow of magnetic response to provide seamless, natural sonic transitions. Each component's materials and design were carefully re-examined, then optimized, to drastically improve the accuracy of signal reproduction throughout the audio spectrum. With the HS8S subwoofer, HIGH CUT control sets the cutoff frequency of subwoofer output high-frequency attenuation from 80Hz to 120Hz, while PHASE switch adjusts the phase of the subwoofer output. The LOW CUT switch and LOW CUT controls enables attenuation of low frequencies for output between 80Hz and 120Hz. The HS8S subwoofer is equipped with XLR and TRS phone jack for inputs and XLR for outputs. 

OnStage SMS6000 Adjustable Studio Monitor Stand (Pair)

The On Stage SMS6000 stands are height-adjustable from 36 to 52 inches and have a 9-square top platform for speakers up to 100 lbs. Leveling spikes in the base let you compensate for an uneven floor surface and the whole base is remarkably stable. Other features include a safety pin in the vertical post and arc-welded, steel construction. The vast majority of today's studio monitors are near field monitors and near field monitors sound best when you listen from the sweet spot. These great On Stage monitor stands let you pinpoint the placement of your speakers so you know you're hearing exactly what they're producing.

Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Male to Male Balanced Cable (10-Feet)

The Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Balanced Cable gives you a male on one end, and a male XLR on the other. The Pig Hog Solutions line features an expanding selection of adapters and cables designed to solve common interfacing problems in the studio and on stage. The cable is manufactured to our high-quality standards to insure transparent reproduction of the source audio without any coloration or distortion.

Knox Gear 25Ft XLR Cable Male to XLR Female Microphone Cable

Knox Gear 25FT XLR Male - XLR Female Microphone Cable, is professionally designed to prevent external interference and ensure signals travel rapidly and smoothly with minimum distortion, delay, or loss. These cables feature two 20-gauge CCAM conductors, which are twisted pair with cotton yarn fillers, conductive PVC shield with 100% coverage, and CCAM spiral shielding with 90% coverage.