Blackstar Amplification AMPED2 100-Watt Guitar Amp and Pedal with Integrated OLED Display Screen

Blackstar Amplification AMPED2 100-Watt Guitar Amp and Pedal with Integrated OLED Display Screen

Blackstar Amplification AMPED 2 is a 100 Watt pedal power amplifier with drive pedals in the front end, and an advanced effects processor, capable of delivering the tone and feel of traditional valve amps. You can use it in the front end of a traditional amp, power a cabinet at 100 Watts, or go direct, ensuring you can take your sound with you anywhere. Power reduction down to 1W and USB-C connectivity means it’s equally at home in the studio or the stage.

High Headroom Power Amp Design

The power amplifier’s unique, high-headroom design does not compromise on output even at 16 Ohms. Get maximum power and optimum tone with any cabinet set-up at 8 or 16 Ohms. Blackstar’s patented Response control offers distinctly different and authentic power valve responses and guitar amp dynamics.

Speaker Simulator and Direct Outputs

Fine-tune your cabinet, mic, and room simulations with CabRig technology and output via XLR or stereo jack. Alternatively, connect via USB for effortlessly simple recording to your DAW without the need for an interface.

Advanced Effects Processor

Four studio-quality, fully configurable, built-in effects pedals (Drive, Modulation, Delay, and Reverb) provides unparalleled versatility.

Performance Ready Amp

The AMPED 2 is a complete, all-in-one, gig-ready solution for guitarists looking to transport their tone from studio to stage with ease.

Switchable Power Valve Responses

The response switch delivers three distinctly different authentic power valve responses – EL84, EL34, and 6L6. Each setting delivers the response, dynamics, sag, and break-up characteristics of the selected valve power amp.

Pro Connectivity

Pro connectivity and integration into your setup using low latency USB audio as an interface for recording, and XLR D.I. for live use.

Cab Rig

Includes next-generation DSP speaker simulator that reproduces the sound and feel of a mic ’d-up guitar cab in incredible detail. Deep-dive using the accompanying free Architect software and capture the incredible tones via USB/XLR.

Pedalboard Partner

Effects loop, 2x 9V DC outputs, and MIDI control for easy integration into your pedalboard or rig.

Power Reduction

The power reduction switch allows you to select 100 Watts, 20 Watts, or 1 Watts to easily get the perfect balance of power and response for any situation from studio to stage.

Tuner

Onboard chromatic tuner allowing for tuning on the fly during live performances.

Display Screen

The integrated OLED display screen allows you to visualize the tuner, changes to front panel settings, and also allows you to adjust hidden parameters that are available whilst using the shift function.

Reverb, Delay, and Modulation With Freeze/Emphasis Effect

The Reverb type, time, and level can be customized on the front panel of the amplifier. The Reverb tone can be customized using Blackstar’s Architect deep-editing software and saved to the Dept. 10 AMPED 2 in place of the default reverb. When the Reverb is active, holding the Reverb footswitch will activate the ‘Freeze’ effect. The Delay type, time, feedback, and level can be customized on the front panel of the amplifier. The Delay pedal can be placed pre or post-Amplifier section using Blackstar’s Architect deep-editing software. The Delay trails can also be turned on or off using Blackstar’s Architect software. When the Delay pedal is active, holding the Delay footswitch will activate the ‘Freeze’ effect. The Modulation type, time, depth, and level can be customized on the front panel of the amplifier. When the Modulation pedal is active, holding the Modulation footswitch will activate an ‘Emphasis’ effect. The current settings of the selected Modulation type will be emphasized, with the result being a more intense effect.

Universal Voltage

Dept 10. AMPED 2 is universal voltage so can be used anywhere in the world from 100V to 240V to 50/60Hz. Just stick it in your gigbag and hop on that plane.

Authentic Valve Amp Feel

The unique power amplifier design uses current feedback which mimics a valve amplifier's interaction with a speaker cabinet. This very high headroom design delivers the thump and presence of a valve amp with 100W power, into any speaker cabinet at 8 or 16 ohms.