Electro-Harmonix Epitome Multi-effects Pedal with Dedicated Controls for Classic Octave Effects

Electro-Harmonix Epitome Multi-effects Pedal with Dedicated Controls for Classic Octave Effects

The Electro-Harmonix Epitome Multi-effects Pedal is the quintessence of guitar effects. This powerful digital multi-effect begins with the flawless polyphonic tracking of the Micro POG. Next is the Stereo Electric Mistress. Creamy stereo flanging and chorus weave and undulate for the richest modulations. Finally, the Holy Grail Plus wraps you in a silken shroud of luxurious reverb. Shimmer mode reroutes the effects chain for a heavenly modulated ambiance.

Blend Knob

It controls the wet/dry from 100 percent dry to 100 percent wet.

Amount Knob

The function of the AMOUNT knob changes with each REVERB mode.

Sub Octave Knob and Octave Up Knob

It controls the output volume of the SUB OCTAVE signal. The Octave Up Knob controls the output volume of the OCTAVE Up signal.

Shimmer Switch

It enables SHIMMER mode, which changes the routing between each effect to produce a lush, shimmering reverb tone while keeping a dry initial attack. When SHIMMER mode is enabled, the Holy Grail Plus LED lights up green. If SHIMMER is disabled, the Holy Grail Plus LED will be red.

Rate Knob

This knob controls the speed or rate of the LFO signal that modulates the flanger. It also controls the rate of the Chorus effect.

R Output Jack and Reverb Switch

This 1/4-Inch jack is the right effect output jack. The reverb switch chooses the reverb mode i.e., SPRING, HALL, ROOM, or FLERB.

Mono/L Output Jack

This 1/4-Inch is the main effect output jack when connected in mono and the left output when hooked up in stereo.

Flanger Depth Knob and Chorus Depth Knob

It controls the amount of Flange that is mixed with the direct signal. The Chorus Depth Knob controls the amount of the chorus sound.

Dry Knob and Mono/L and R Input

It controls the output volume of the DRY signal. When using the Epitome with only one input, it is suggested you use the MONO/L input.

Holy Grail Plus Footswitch and Status LED

When the LED in the holy grail plus section is lit, the Holy Grail Plus effect is active. A Red LED in the Holy Grail Plus section indicated that the SHIMMER setting is off. A green LED in the Holy Grail Plus section indicated that the SHIMMER setting is on.

Micro POG Footswitch and Status LED

When the LED in the Micro POG section is lit, the Micro POG effect is active.