Tech 21 Paul Landers PL1 Signature FlyRig Multi-FX Pedal

Tech 21 Paul Landers PL1 Signature FlyRig Multi-FX Pedal

The Tech 21 Paul Landers PL1 Signature FlyRig Multi-FX Pedal offers 2 SansAmp channels, one clean and one dirty. Like the other FlyRigs, it offers the same ease, portability, confidence, and multi-functionality for going direct to a mixer or P.A. and as a pre-amp/stompbox in live performances. Paul Landers has been a long-time user of Tech 21 gear, both the SansAmp GT2 and SansAmp PSA, which is especially prominent in their worldwide smash “Du Hast.” While he liked the format of the FlyRigs, Paul was looking for a different feature set. Given Paul’s long-term relationship with Andrew Barta, it was a no-brainer to collaborate on a FlyRig to fulfill his individual needs.

SansAmp Feuer (Fire) and SansAmp Wasser (Water)

The Paul Landers Signature FlyRig features two all-analog SansAmp channels to switch between dirty and clean tones. The Feuer section has 3-band active EQ controls with switchable Mid, Drive, and Level. The Wasser section has dual-band active EQ controls, compression, and Level. There’s a Bite switch for a presence boost which provides extra clarity to the top end, increased definition to your notes, and an edginess with increased harmonics and a slight breakup.

DLA with Tap Tempo + Vibrato + Ambience

Delay is voiced for the sounds of a vintage tape echo. It features Time and Repeats controls and a dedicated Tap Tempo footswitch. Vibrato alters the functions of Time and Level: Time controls the speed of the vibrato. Min = Slow; Max = Fast. The level adjusts the depth of the vibrato. In Vibrato mode, you can use the Tap Tempo to control the speed. The ambiance provides a smooth, full sweep to easily dial in the amount of ambiance desired. Choose from: Out position = Close mic’d ambiance. In position = Standard room ambiance.

Boost

Independent dual-mode Boost function. Post-SansAmp positive boost up to +6dB and “negative” boost down to -10dB.

Tuner

Chromatic Tuner is operable via the TAP/TUNER footswitch in the DLA section. You simply hold the footswitch down to engage the Tuner, which simultaneously mutes the signal path.