Dracast DRDP3LBEK Plus Series Bi-Color 4-Light ENG Kit with V-Mount and Gold Mount Battery Plates

Be ready for nearly anything with this Bi-Color ENG Plus 4-Light Kit from Dracast. It packs together two LED1000 Plus LED lights and an LED500 Plus LED light, which when combined make a great three-point lighting setup, along with a small LED200 on-camera LED light for more mobile setups. Besides the fixtures, the kit also includes three 90Wh V-mount lithium-ion batteries and a dual battery charger, as well as four-way barndoors, filter frames, and two filter sets for the LED1000 and LED500 panels. Additionally, three light stands and a hard carrying case are included.

LED1000 and LED500 Plus Series Bi-Color LED Light

Expanding on their line of panels, the LED1000 and LED500 Plus Series Bi-Color LED Lights from Dracast add a digital display for adjusting output as well as Cat5 DMX input and output for linking and comes with both Gold mount and V-mount battery plates. The LED1000 light features 1024 LEDs and the LED500 light features 512 LEDs with a high CRI of >95 for excellent color accuracy. Also, these models feature a variable color temperature from 3200-5600K for quickly matching either daylight or tungsten sources without needing to mess around with gels.

The lights offer a spot beam angle of 45 degrees as well as dimming from 0-100%. Benefiting operation, it can run off of either a DC source, such as a Gold mount or V-mount battery, or a universal 100-240 VAC adapter. Each light is durable as well with an aluminum chassis, frame, and mounting yoke and LED1000 only consumes 60W of power and LED500 only consumes 30W of power. Additionally, it is lightweight at just 5.5 pounds and measures 12 x 12 x 2 inches in size.

LED200 Bi-Color On-Camera LED Light

The LED200 Bi-Color On-Camera LED Light from Dracast is a 3200 to 5600K on-camera LED designed for DV and DSLR photographers in need of a lightweight, portable, and continuous lighting source. The LED fixture mounts onto a shoe mount. It has a life expectancy of 50,000 hours, a CRI of over 95, a run-time of two to four hours, and an effective distance of 20′. The light comes with a nylon soft carry case.

Dracast 90Wh 14.8V Li-Ion V-Mount Battery

The Dracast 90Wh 14.8V Li-Ion V-Mount Battery is a memory-effect-free battery for professional camera systems. It features built-in electronics to protect the battery during charging and use, charger is not included with the battery. The 5-LED battery system provides an indicator that shows you how much capacity the battery has left before it needs to be charged. It incorporates a D-tap power outlet, so you can power accessories directly, instead of through your camera’s electronics. With an operating temperature range of -4 to 122-degree-F, the battery will keep working even in deep cold and extreme heat.

Dracast DR-CH2V Dual V-Mount Battery Charger

The portable DR-CH2V Dual V-Mount Battery Charger from Dracast allows you to simultaneously charge two V-Mount batteries (or a single battery) from 90 to 240 VAC sources. It features a top handle for easy transport and built-in capacity management system to ensure fast charging. The charger will automatically shut down once the batteries reach their full charge. Additionally, the charger can function as a portable AC to DC power adapter, taking the AC power input and outputting 15 VDC at 4A via a 4-pin XLR connector. The output is only active when no batteries are attached.

Barndoors for LED1000 and LED500 Lights

These Barndoors from Dracast are made for LED1000 and LED500 Lights, and slide into a slot on the front of the LED light. They are used to control the spread of the light and prevent unwanted light spill and they feature a filter holder.

Filter Frames for LED1000 and LED500 Lights

The Dracast Filter Frame for LED1000 and LED500 allows the use of Dracast or other brand diffusion, CTO, CTB, or effects filters with the fixture. Constructed of lightweight aluminum, the frame drops into the fixture’s accessory channel. It has a frame lock to prevent filter slippage.

2-Piece Filter Set for LED1000 and LED500 Panels

These 2-piece Filter Sets for LED1000 and LED500 Panels contain 2 rigid light modifiers that measure approximately 12 x 12 inches to match the fixture. Included in the kit is one 1/2 CTO filter to warm the light’s daylight balance towards the tungsten end of the spectrum. A Half White Diffusion is also included to soften the light’s output.

DLS-805 Spring-Cushioned Light Stand (6-Feet)

The DLS-805 Spring-Cushioned Light Stand from Dracast extends from 28.5 to 72 inches and has a load capacity of 13 pounds. It folds down to 28.5 inches for transport, and weighs 3.4 pounds. There is a 5/8-inch stud on top of the stand. The stand is composed of lightweight aluminum and is anodized to cut down on reflections. It is spring-cushioned to keep lighting fixtures damage-free when lowering. Large knobs are easy to grip and allow for quick, smooth adjustments.