Sony Alpha 7S III Full-frame Mirrorless Digital Camera Body with 320GB Memory Card Bundle

Sony Alpha 7S III Full-frame Interchangeable Mirrorless Digital Camera Body (Black)

With extreme full-frame movie performance including high sensitivity (expanded ISO up to 409600), 15-stop wide dynamic range, 4K 120p2, fast and dependable autofocusing, and extra-strong image stabilization, the Sony Alpha 7S III Full-frame Interchangeable Mirrorless Digital Camera Body again raises the bar for movie makers.

Exmor CMOS Sensor

The Alpha 7S III features a newly developed 12.1-megapixel Full-frame Backside-illuminated (BSI) Exmor R CMOS sensor that delivers sensitivity, speed, and superior images and movies. It takes full advantage of the large pixels and BSI copper wiring structure to more than double the sensitivity and readout speed2. In addition, this new Exmor R sensor features Sony’s acclaimed fast hybrid autofocus with 759 phase-detection AF points and 92 percent coverage. The high sensitivity also allows it to autofocus in light as low as EV-611.

New BIONZ XR Processing Engine Delivers 8x More Processing Power

A new BIONZ XR processing engine delivers 8x more processing power than previous models. It not only supports the high sensitivity and wide dynamic range that has become hallmarks of the S series but also high-speed features such as real-time AF tracking and up to 10fps continuous shooting of more than 1000 RAW still.

Low Noise Images with ISO up to 409,6003 and 15+Stop Dynamic Range

The Alpha 7S III builds on the legendary low-light performance synonymous with Sony’s S series. The 12.1MP1 sensor is optimized for 4K with full-pixel readout and makes use of much larger individual pixels for maximum light-gathering capabilities and low signal-to-noise ratio.

10bits 4:2:2 Video Reaches New Levels of Realism

The α7S III can record 10-bit 4:2:2 video internally when using Long GOP or All Intra compression, making it possible to grade for fuller, more natural gradations while generally providing greater editing freedom. The maximum frame rate when recording full-frame 4K is 120p5.

Efficient MPEG-H HEVC/H.265 Coding

In addition to Sony’s common XAVC S (MPEG-4 AVC/H.264) codec found on current models, the α7S III adds XAVC HS format recording21 using the MPEG-H HEVC/H.265 codec for approximately twice the efficiency of XAVC S.

16bits RAW Output for Movie

The α7S III is capable of 16-bit RAW output up to 4K 60p to an external device6 via HDMI, to answer the increasing demand for RAW recording for applications that demand the highest quality and post-production flexibility provided by RAW output.

Fast Hybrid AF in All Modes

The α7S III incorporates Sony’s highly acclaimed fast hybrid AF in all modes for both still and movie shooting.

Effective Heat Dissipation

The heat buildup from processing large volumes of data when recording high-bitrate, high-resolution 4K 60p and 120p5 movies can plague other systems, but not the Alpha 7S III.

Two CFexpress Type A-Compatible Media Slots

Dual card slots, both compatible with CFexpress type A and SDXC/SDHC.

Vari-Angle LCD Monitor for Comfortable Movie Shooting

The 3-Inch Flip-out, vari-angle LCD monitor with touch menu and controls.

9.44 Million-Dot High-Definition Electronic Viewfinder

World’s first 9.44M8 dot 0.64-inch QXGA OLED eye-level viewfinder.

Advanced AF Transition and Sensitivity Settings

The new Exmor R full-frame image sensor and revolutionary BIONZ XR image-processing engine deliver always-active pinpoint AF for astonishing detail in both space and time, and stunning 4K movies even at 120 frames per second2 or in slow motion. With the resolution and depth of field only possible from a full-frame sensor, the results are spectacular.

Digital Audio Interface for Superior Sound

The camera’s Multi Interface Shoe allows for MI shoe microphones and accessories to be attached and features a built-in Digital Audio Interface for superb audio quality.

High transfer speed USB Type-C (USB 3.2) Connector

A USB Type-C connector that supports fast USB Type C (SuperSpeed USB 5Gbps (USB 3.2) data transfer is provided. This makes high-speed PC Remote (tethered) data transfer available for the smooth handling of large image files. It also provides USB to high-speed wired LAN connectivity via an optional USB-Ether wired LAN adapter cable that provides direct connectivity to 1000BASE-T Ethernet networks for fast wired FTP data transfers.

Designed with the Environment in Mind

Sony is committed not only to offering products, services, and content that deliver exciting experiences but also to working towards our goal of a zero environmental footprint throughout our business activities.

Sony Digital Shotgun Microphone ECM-M1

Eight audio recording modes Beamforming8 technology combines four discrete microphone capsules with precision algorithms to maximize pickup sensitivity in the desired directions while reducing it in others. The result is an incredibly compact and versatile microphone with high performance even in challenging audio environments.

Super-directional   

Super-directional: Records sound from the front clearly and suppresses ambient sound. A great choice for shooting or streaming videos where the subject speaks directly in front of the microphone.

Uni-directional   

Uni-directional: Records sound over a wider area in front of the microphone. Recommended for recording conferences or meetings.

Omni-directional  

Omni-directional: Picks up sound equally from all directions. A good choice when the sound of the surrounding environment is to be recorded.

Super-directional (Rear)   

Super-directional (Rear): Sound is primarily picked up from the rear of the microphone, with frontal sound being picked up at a lower level. This mode is useful for shooting scenery while the operator provides narration from behind the camera.

Super-directional (Front+Rear)  

Super-directional (Front+Rear): Sound is picked up equally from the front and rear of the microphone, along with less sound from the left and right sides. This makes it possible to simultaneously record a subject in front of the camera and the operator speaking from behind it. A good choice for interviews.

Super-directional (Front/Rear) Separate   

Super-directional (Front/Rear) Separate: Sound is picked up equally from the front (1ch) and rear (2ch) of the microphone, with greater attenuation of sound from the left and right sides. The levels of the front and rear sounds can be adjusted after recording, making this mode ideal for post-production editing.

Stereo   

Stereo: Stereo recording achieves a realistic positioning of the left (1ch) and right (2ch) sides within the stereo sound field. Recommended for shooting moving subjects such as cars or trains, and for music or theatrical performances.

Ultra-directional   

Ultra-directional: Enables the pickup of target sound from the front (within approximately a 30-degree width) while effectively suppressing the other sound, dynamically adapting to ambient sound in the surroundings*7. The Ultra-directional mode is a good choice for shooting scenes such as interviews or selfies where the subject is always in front of the microphone.

Simple controls for easy setting and operation

Simply turning a dial on the rear of the microphone allows easy, intuitive selection of pickup patterns, and a lock button in the center prevents accidental changes. Other controls are also straightforward and easy to understand and operate.

Digital noise cut filter for clear sound The ECM-M1 features a complete digital pathway, from beamforming control, to noise filtering and interfacing with the camera. The result is the clearest sound possible, for everything you capture.

Digital audio interface

The digital audio interface offers an all-digital signal path from microphone to camera*2, avoiding the noise and distortion associated with analogue transmission, and retaining the full benefit of the digital signal processing in the microphone.

Mechanical noise suppression

A design that dampens shock and vibration effectively minimizes low-frequency mechanical noise. 

The absence of connecting cables also means that no noise can be transmitted to the microphone mechanically via cables and connectors.

Windscreen supplied The ECM-M1 is supplied with an effective fur-type wind screen, easily detachable, that can reduce wind noise when shooting outdoors.

New compact, lightweight design

With four mic capsules arranged in a rhombic pattern plus beamforming *8 technology to control directivity, this advanced microphone is remarkably compact and lightweight. It is just 64.4 x 40.0 x 72.2 mm in size and weighs a mere 65 grams. *3

Shooting freedom and mobility

The small size of ECM-M1 keeps the overall system compact for maximum shooting freedom and mobility. It can also be easily added to gimbal or grip mounted rigs and won’t extend into the frame with a wide-angle lens. Minimum rear extension means that the microphone won’t block the user’s face, allowing unrestricted 

access to the camera viewfinder.

Multi-Interface (MI) Shoe support for extensive shooting freedom

Multi Interface (MI) Shoe support allows the microphone to be connected to the camera without additional batteries or cables. Power is supplied to the microphone from the camera, eliminating the need to charge and monitor a separate battery. And because no cable is required, the camera’s vari-angle LCD monitor can be used in any position without interference.

Backup safety recording

4-channel recording with compatible camera *2, with channels 3 and 4 ideally suited to making backup “safety” recordings. Channels 3 and 4 record safety tracks in omnidirectional mode (fixed for channel 3, and -20 dB*4 fixed for channel 4) while the main audio is recorded to channels 1 and 2 using the selected directivity pattern.

Easy operability

Comprehensive, clearly marked controls make it easy to adjust and confirm all microphone settings. Included controls are FILTER switch, ATT switch, AUTO/MAN switch, AUDIO LEVEL dial, and DIGITAL/ANALOG switch.

Dust and moisture-resistant design

The ECM-M1 features a dust and moisture resistant *6 design that allows reliable operation in challenging outdoor conditions.

Sony MRWG2 CFexpress Type A/SD Memory Card Reader

The Sony CFexpress MRWG2 Card Reader provides SuperSpeed USB 10Gbps (USB 3.2 Gen 2) transfer speed and is specifically designed for the Sony CFexpress Type A memory cards. The USB Type-C connector provides users an optimized workflow by transferring image files, 4K video and other large content approximately 2.8 times faster when used with Sony CFexpress Type A card. The CFexpress card reader is compatible with CFexpress Type A and SDXC/SDHC (UHS-I and UHS-II) memory cards.

Sony CFexpress Type A 320GB Memory Card with 800MB/s Read and 700MB/s Write speed

High-speed performance

Sony CFexpress Type A memory cards are designed for professional photographers, videographers, and enthusiasts looking to super-charge their workflow with unrivaled speed and reliability. Ultra-high-speed performance (up to 800MB/s read and 700MB/s write) is efficiently packed in the compact and durable body, to help you get the most from the latest high-end cameras.

Dependable videography

Sony CFexpress Type A cards are optimized for continuous, high-bandwidth data writing, making them ideal for professional high-bitrate video recording, such as 4K 120p, where dependability is critical. For extra reassurance and video recording stability, they also carry the VPG (Video Performance Guarantee) 400.

Rapid response photography

Dramatically expand your photographic possibilities, with uncompressed continuous RAW shooting for fast-moving action such as motorsports and wildlife. Writing speeds of up to 700MB/s ensure ultra-fast camera buffer clearance for responsive, continuous shooting.

New standard for compact storage

CFexpress Type A cards are a new standard for compact, high-performance storage. Despite being smaller than a conventional SD card, their PCIe Gen3 interface offers ultra-fast data transfer. It is an ideal storage medium for the future of compact, high-bitrate video and still cameras.

Work faster, be more productive

CFexpress Type A memory cards open up worlds of opportunity for professionals. Handling high-resolution files and high-speed recordings in a small but rugged format, it’s perfect for speeding up workflows and improving productivity, allowing you to have more time available for creative work.

Speed up workflow with the CFexpress Type A card reader

Optimized for Sony CFexpress Type A memory cards, the optional MRW-G2 card reader allows you to transfer data via a SuperSpeed USB 10Gbps (USB 3.2) interface and take full advantage of high-speed backups and more efficient workflows. It’s compact, easy to carry, and works with both Sony CFexpress Type A and SDXC UHS-II/UHS-I memory cards.

Made incredibly TOUGH

Thanks to Sony’s unique TOUGH card design, our CFexpress Type A cards offer over 10x greater bend resistance than the CFexpress Type A standard. Designed for absolute dependability, the resin body is 5x more impact-resistant than the CFexpress Type A standard, and provides IP57 dust and water protection2. New heat-dissipating materials also ensure consistent high-speed data transfers, along with resistance to X-rays, UV, and electrostatic radiation.

Sony’s TOUGH for the roughest places

With a tough design, CFexpress Type A memory cards offer superior strength up to 10x greater than the CFexpressType A standard, additional rigidity tested to 150 newtons of force, and can withstand falls of up to 24.6 feet (7.5 meters).

Sony’s TOUGH for the toughest places

You can rely on CFexpress Type A memory cards to work faultlessly in extreme temperatures, X-rays, electrostatic environments and intense UV light. A dust and water-resistant design with IP57 rating, provides the reliability needed for outdoor use in challenging conditions.

File Rescue: Recover lost files

Even when things go wrong, you can avoid disaster with downloadable rescue software for Sony CFexpress Type A memory card customers. This free software can recover accidentally deleted files and corrupted photos and videos in todays’ common formats.

Media Scan Utility: Scan and monitor your memory

Over time, flash memory wears out and no longer reliably records data. Sony's Media Scan Utility automatically scans your CFexpress Type A memory card each time you connect it to your PC, keeping you informed of its condition so you can take action before the limit is reached. The MRW-G2 card reader (sold separately) is required in order to scan Sony CFexpress Type A memory cards.

Koah 2000mAh Li-ion Batteries for Sony NP-FZ100 (2-Pack) with LCD Dual Charger

With the Koah 2-Pack 2000mAh Rechargeable Lithium-Ion Battery Kit for Sony NP-FZ100 with Dual Charger you can be sure you always have enough power to make it through the shoot. The Koah rechargeable lithium-ion battery and charger kit includes two batteries for the Sony NP-FZ100 and one dual-USB LCD charger. It allows you to quickly charge two camera batteries at the same time.

More Power

The NP-FZ100 battery features 2000mAh and is rated at 7.2V for a long run time Equipped with premium lithium-ion cells to provide maximum battery life, the batteries also come with a 3-year manufacturer warranty. The Koah batteries are completely compatible with all Sony original equipment, including the Sony charger.

LCD Dual Charger

The dual charger features an LCD display and a USB port that can be employed universally. The unit is compact, portable, lightweight, and suitable for travel. The LCD Dual Charger features an input power of 5V 2.1A and an output power of 5/10V. The charger works with original Sony batteries.

Koah Roebling Street Camera System Gadget Bag with Accessory & Cleaning Kit

The lightweight Koah Roebling Street Camera System Gadget Bag is designed to hold and protect your DSLR camera from dust, scratches, bumps and bruises while traveling on the road. A convenient flap enables full access to the main compartment, allowing you to easily remove the camera and gear within seconds. The front flap is secured via two buckle clips. The case features a front zippered pocket and mesh pockets on both sides. Also included with this bag is an optics care and cleaning kit.

Convenient Design

The Koah Roebling Street’s padded interior comes with padded dividers that help for better organization. It features additional pockets at the front, side and rear for storing small accessories like batteries, memory cards, cables and lens caps. Attach the included shoulder strap for comfortable carrying. The case also features an ergonomic cushioned handle at the top.

Koah Photography Cleaning Kit

This Photography Cleaning Kit by Koah comes complete with a compact mini tripod, a microfiber lens cloth, a fine bristle cleaning brush, lens cleaning wipes, a lens cleaning spray bottle, a rubber bulb air blower, loop straps, and finally a small carrying pouch to store these accessories. This kit was designed to meet the cleaning needs of various photography and video optics, binoculars and spotting scopes, filters and other glass elements.

Koah LCD Ultra Armor Screen Protector for Sony a1, a7 II, a7 III, a7R IV and More

Protect your gear with the Koah LCD Ultra Armor Screen Protector for Sony a1, a7 II, a7 III, a7R IV and other Sony Alpha series cameras. With six layers of protection and maximum visibility, the Ultra Armor Screen Protector keeps your camera safe without getting in the way.

Construction

The Koah LCD Ultra Armor Screen Protector is made with anti-glare properties that enable the natural use of your camera. Offering greater than 95 percent light transparency, it's anti-scratch and features a dust- and sweat-resistant surface to preserve visibility. The glass is thinner than paper at only 0.3 millimeters thick yet offers six layers of protection.

Compatibility

The Ultra Armor LCD Screen Protector from Koah fits the Sony a1, a7 II, a7 III, a7R IV series digital cameras and more. It works seamlessly with touch and swivel screens and is easy to install using its adhesive backing. For other camera types, use a different model of the screen protector, sold separately.